F5F Stay Refreshed Hardware Desktop RAM

RAM

RAM

A
ayahnib
Member
213
06-05-2016, 01:51 PM
#1
Hello! So I've completed about 95% of my PC build and now I'm out of RAM. It's an AMD system with a Ryzen 3 1200. I'm looking for advice on the right type and speed (MHz) of RAM to install. Any suggestions?
A
ayahnib
06-05-2016, 01:51 PM #1

Hello! So I've completed about 95% of my PC build and now I'm out of RAM. It's an AMD system with a Ryzen 3 1200. I'm looking for advice on the right type and speed (MHz) of RAM to install. Any suggestions?

J
Jupiter309
Junior Member
9
06-05-2016, 02:30 PM
#2
The maximum supported speed for this controller is 2666 MHz.
J
Jupiter309
06-05-2016, 02:30 PM #2

The maximum supported speed for this controller is 2666 MHz.

C
Cupcake_Rose
Posting Freak
844
06-05-2016, 02:46 PM
#3
There’s no strict cap on memory speed. Even with a current BIOS, a Gen 1 Ryzen can boot at speeds above 2933–3200 MHz.
C
Cupcake_Rose
06-05-2016, 02:46 PM #3

There’s no strict cap on memory speed. Even with a current BIOS, a Gen 1 Ryzen can boot at speeds above 2933–3200 MHz.

F
Freakiiianyx3
Senior Member
694
06-05-2016, 04:12 PM
#4
This setup works with your R3 1200 and 3200MHz CL16 RAM.
F
Freakiiianyx3
06-05-2016, 04:12 PM #4

This setup works with your R3 1200 and 3200MHz CL16 RAM.

Z
Zivick
Member
66
06-07-2016, 12:57 PM
#5
I’d opt for DDR4 3200MHz RAM, CL16 or below.
Z
Zivick
06-07-2016, 12:57 PM #5

I’d opt for DDR4 3200MHz RAM, CL16 or below.

D
DutchMenno
Member
61
06-08-2016, 07:11 PM
#6
RAM should work smoothly even if it runs slower than expected. Avoid spending too much on high-end options—just get what fits your needs. Be careful not to accidentally purchase laptop RAM.
D
DutchMenno
06-08-2016, 07:11 PM #6

RAM should work smoothly even if it runs slower than expected. Avoid spending too much on high-end options—just get what fits your needs. Be careful not to accidentally purchase laptop RAM.

T
theaj42
Member
50
06-15-2016, 05:59 AM
#7
Ah, yes. I remembered about this somewhere. I gave it based of what I found. I dunno, but does it run on lower speed than that 3200 MHz? As stated by @TrigrH and I actually read about it either somewhere else. Afaik, generally first gen Ryzen won't use that much memory clock either. I never went higher than 2400 MHz actually (the max of the RAM module itself, R5 1500X).
T
theaj42
06-15-2016, 05:59 AM #7

Ah, yes. I remembered about this somewhere. I gave it based of what I found. I dunno, but does it run on lower speed than that 3200 MHz? As stated by @TrigrH and I actually read about it either somewhere else. Afaik, generally first gen Ryzen won't use that much memory clock either. I never went higher than 2400 MHz actually (the max of the RAM module itself, R5 1500X).

_
_Cobra
Junior Member
27
06-15-2016, 06:42 AM
#8
Explore further. Although the 1000 series struggles with memory storage, it can still reach over 2666 when powered properly. In my opinion, opting for high-quality RAM is wise, since the controller in this series is known to be problematic and may not even function with the standard DOCP settings. Fortunately, options like Crucial Ballistix are readily available, offering a reliable choice at about $60 for a 2x8 3000mhz C15 module.
_
_Cobra
06-15-2016, 06:42 AM #8

Explore further. Although the 1000 series struggles with memory storage, it can still reach over 2666 when powered properly. In my opinion, opting for high-quality RAM is wise, since the controller in this series is known to be problematic and may not even function with the standard DOCP settings. Fortunately, options like Crucial Ballistix are readily available, offering a reliable choice at about $60 for a 2x8 3000mhz C15 module.

M
MarissaGames
Member
216
06-17-2016, 02:24 AM
#9
Confirmed. Useful to know the capacity extends beyond this limit.
M
MarissaGames
06-17-2016, 02:24 AM #9

Confirmed. Useful to know the capacity extends beyond this limit.

F
56
06-22-2016, 12:26 AM
#10
Sure, I understand. My Athlon 200 and 220ge handle decent speeds with the right components. The Corsair LPX and vengeance kits I own fall short of 3000mhz. Someone reliable here would be great. Yes, investing in quality "binned" memory is definitely worthwhile.
F
feral_blue_cat
06-22-2016, 12:26 AM #10

Sure, I understand. My Athlon 200 and 220ge handle decent speeds with the right components. The Corsair LPX and vengeance kits I own fall short of 3000mhz. Someone reliable here would be great. Yes, investing in quality "binned" memory is definitely worthwhile.