R7 5800x3d experiencing 0.54ghz issue
R7 5800x3d experiencing 0.54ghz issue
It’s hardly absurd to admit you’re mistaken when there’s no evidence to contradict it. Unless you’ve copied someone else’s version of the setup, let’s test your claim. So far, no one has disproved my observations. I’d appreciate it if someone could conclusively confirm another possibility. Whatever you say, the fact is DOCP means Intel acknowledges XMP results overclocking, both pushing memory beyond specifications and risking instability. Until you demonstrate otherwise, you can’t refute what I’ve shown. I won’t keep debating or turning this into a heated exchange.
Cpus are officially advertised for 3200mhz, but it becomes questionable when you compare them to higher MHz ratings. Yes, the docp xmp setting is an overclock, and since JEDEC doesn’t support faster speeds, you’ll need an xmp profile above 2666 unless you manually boost it. I’m not sure if the listed speed is truly included in specs, because the manufacturer sets it based on what’s achievable with the standard profile. I usually ignore specs and focus on overclocking—I’ve pushed my DDR2 to 1520mhz stably, which is close to the world record (around 80% of it). Most high-speed RAM only reaches about 1066–1200 for DDR2, so I argue that fast RAM can be tough. At this frequency, you’ll likely encounter crashes or freezes. What I’ve seen is mostly instability and performance drops. I’m confident my setup handles the strain, especially since I’ve pushed it to extreme levels. Maybe someone more experienced can help, so I’ll reach out to @freeagent—they might have insights from similar setups.
We reviewed the AMD chipset drivers and noticed they were outdated, so we installed the latest versions. The system appears to be functioning properly now. We’re allowing a few more days to confirm everything is working as expected. Thank you for pointing that out.
Changing the chipsets didn't resolve the issue; it's still trying to determine the root cause, possibly related to the motherboard.
it turns out his keyboard was the source of the problem. after repeated crashes and freezes, he stopped using his computer and switched to his wife’s machine at his desk. when her PC finally started, it worked perfectly. he then moved it back to hers, which turned on immediately. once he connected devices, the new PC booted up without any issues. he received a fresh keyboard and hasn’t experienced any problems since. he mentioned using a Logitech keyboard but didn’t specify the model.
instability issues arose, including crashes and video glitches, mysterious restarts without warnings, and strange errors. Despite these problems, the system remained functional until a BIOS update improved memory compatibility. It seems the faulty RAM might have contributed to low CPU performance, though I’m not entirely sure. Based on what you shared, I agree and apologize—thank you for clarifying. Avoid buying cheap USB devices from Amazon.