Question Red Light Ez Debug VGA, DRAM and CPU ?

F5F Stay Refreshed Hardware Desktop Question Red Light Ez Debug VGA, DRAM and CPU ?

Question Red Light Ez Debug VGA, DRAM and CPU ?

Question Red Light Ez Debug VGA, DRAM and CPU ?

X

xxuhuy
Member

129

11-18-2016, 01:35 AM

#1

Hi there,
My PC initially displayed a red light during debug for VGA only. After removing the GPU, it now shows CPU and DRAM. There is no display, but the RGB lights and fans are still active.
My system details:
Ryzen 3 1200
16GB DDR4 3200MHZ 2x8 Corsair Vengeance
MSI B350M Gaming PRO
Gigabyte GTX 1060 3GB
512GB crucial SSD
Windows 10 Pro 64bit
Corsair CV550

X

xxuhuy

11-18-2016, 01:35 AM #1

Hi there,
My PC initially displayed a red light during debug for VGA only. After removing the GPU, it now shows CPU and DRAM. There is no display, but the RGB lights and fans are still active.
My system details:
Ryzen 3 1200
16GB DDR4 3200MHZ 2x8 Corsair Vengeance
MSI B350M Gaming PRO
Gigabyte GTX 1060 3GB
512GB crucial SSD
Windows 10 Pro 64bit
Corsair CV550

P

PaigeOfTheBook
Senior Member

733

11-21-2016, 02:04 PM

#2

Ensure your RAM is properly placed in the slots and that all power cords are fully inserted. Consider resetting the CMOS if possible. A brief wait may be needed for a successful first boot when using a Ryzen system.

P

PaigeOfTheBook

11-21-2016, 02:04 PM #2

Ensure your RAM is properly placed in the slots and that all power cords are fully inserted. Consider resetting the CMOS if possible. A brief wait may be needed for a successful first boot when using a Ryzen system.

S

Sydney0801
Junior Member

4

11-21-2016, 03:53 PM

#3

Hi piagraffy,
Thanks for your update.
After switching the RAM stick to the second slot, the VGA and DRAM red lights disappeared, leaving only the CPU visible. I reset the CMOS and after restarting, the system displayed "device changed, cmos cleared, ram changed." At that moment, no peripherals were connected. I then tried connecting my keyboard, but the screen went black and RGB output was absent from my peripherals—though the PC functioned normally and should have shown RGB when active.
I attempted to boot again, but the screen remains black.

S

Sydney0801

11-21-2016, 03:53 PM #3

Hi piagraffy,
Thanks for your update.
After switching the RAM stick to the second slot, the VGA and DRAM red lights disappeared, leaving only the CPU visible. I reset the CMOS and after restarting, the system displayed "device changed, cmos cleared, ram changed." At that moment, no peripherals were connected. I then tried connecting my keyboard, but the screen went black and RGB output was absent from my peripherals—though the PC functioned normally and should have shown RGB when active.
I attempted to boot again, but the screen remains black.