F5F Stay Refreshed Hardware Desktop Question My CMOS battery dropped from my hands and the monitor showed this.

Question My CMOS battery dropped from my hands and the monitor showed this.

Question My CMOS battery dropped from my hands and the monitor showed this.

Pages (2): 1 2 Next
9
992x
Senior Member
506
01-31-2024, 05:26 AM
#1
I was just recharging my CMOS battery because a black screen appeared on my screen when I started up. This has occurred at least three times now, and this is the first time it happened to me. After placing the CMOS battery, I booted up my PC and saw this error screen, which I believe is due to the battery having fallen from my hand. Did I damage it?
9
992x
01-31-2024, 05:26 AM #1

I was just recharging my CMOS battery because a black screen appeared on my screen when I started up. This has occurred at least three times now, and this is the first time it happened to me. After placing the CMOS battery, I booted up my PC and saw this error screen, which I believe is due to the battery having fallen from my hand. Did I damage it?

N
NukeCow24
Junior Member
19
02-17-2024, 09:33 PM
#2
Almost no risk of dropping the battery causing harm.
The battery might be dead.
It could be tilted incorrectly or inserted wrongly.
There might be issues unrelated to the battery.
N
NukeCow24
02-17-2024, 09:33 PM #2

Almost no risk of dropping the battery causing harm.
The battery might be dead.
It could be tilted incorrectly or inserted wrongly.
There might be issues unrelated to the battery.

C
CG_Trevor
Junior Member
18
02-22-2024, 01:01 PM
#3
I'll look into it right away.
C
CG_Trevor
02-22-2024, 01:01 PM #3

I'll look into it right away.

N
NakeBemveu
Member
96
02-22-2024, 01:19 PM
#4
The battery isn't upside down. There might be other reasons for this occurrence. Also, after turning on your PC without touching the F2 button, it immediately went into BIOS—what could explain that?
N
NakeBemveu
02-22-2024, 01:19 PM #4

The battery isn't upside down. There might be other reasons for this occurrence. Also, after turning on your PC without touching the F2 button, it immediately went into BIOS—what could explain that?

D
derFrisson
Junior Member
40
03-05-2024, 08:10 AM
#5
Reboot and choose the right boot device.
That might involve several possibilities.
Am I interpreting this accurately?
You didn’t make any changes to your CMOS battery until you received this message.
That seems correct.
If not, share the precise steps.
D
derFrisson
03-05-2024, 08:10 AM #5

Reboot and choose the right boot device.
That might involve several possibilities.
Am I interpreting this accurately?
You didn’t make any changes to your CMOS battery until you received this message.
That seems correct.
If not, share the precise steps.

L
Lorddoom139
Posting Freak
956
03-05-2024, 08:43 AM
#6
Yeah, I did not do anything on the CMOS battery and there is a continuation on the "Reboot and Select proper Boot Device if you did not notice. I can tell you the sequence of events sure.
L
Lorddoom139
03-05-2024, 08:43 AM #6

Yeah, I did not do anything on the CMOS battery and there is a continuation on the "Reboot and Select proper Boot Device if you did not notice. I can tell you the sequence of events sure.

T
Tea_Rex
Member
61
03-08-2024, 06:24 PM
#7
I recently purchased a GPU online, specifically an AMD Radeon 7470. I didn’t really think about researching it beforehand; all I knew was it was affordable and seemed to perform reasonably well for my needs. Once I got it, I installed it on my PC right away. However, when I tried to use it, my monitor displayed nothing, so I followed some YouTube tips—like removing the CMOS battery for a few minutes, cleaning the RAM, and connecting the display cable to both the GPU and motherboard. After doing that, when I powered it up, the screen appeared normal. I kept experimenting with adjustments, but eventually gave up on getting the GPU and decided to boot my PC without it. But after restarting multiple times and making small changes like entering recovery mode, I still encountered a black screen with random messages. Additionally, I had uninstalled my original Intel Graphics drivers, thinking it would be better to download them first before installing the GPU.
T
Tea_Rex
03-08-2024, 06:24 PM #7

I recently purchased a GPU online, specifically an AMD Radeon 7470. I didn’t really think about researching it beforehand; all I knew was it was affordable and seemed to perform reasonably well for my needs. Once I got it, I installed it on my PC right away. However, when I tried to use it, my monitor displayed nothing, so I followed some YouTube tips—like removing the CMOS battery for a few minutes, cleaning the RAM, and connecting the display cable to both the GPU and motherboard. After doing that, when I powered it up, the screen appeared normal. I kept experimenting with adjustments, but eventually gave up on getting the GPU and decided to boot my PC without it. But after restarting multiple times and making small changes like entering recovery mode, I still encountered a black screen with random messages. Additionally, I had uninstalled my original Intel Graphics drivers, thinking it would be better to download them first before installing the GPU.

S
Stopidkar
Junior Member
12
03-10-2024, 06:32 PM
#8
It seems the topic wasn't displayed as discussed initially but got stuck in the BIOS system. Every time I restart, it loops back to BIOS. Do you know what steps might have resolved this?
S
Stopidkar
03-10-2024, 06:32 PM #8

It seems the topic wasn't displayed as discussed initially but got stuck in the BIOS system. Every time I restart, it loops back to BIOS. Do you know what steps might have resolved this?

N
NerdTrooper
Member
82
03-17-2024, 08:11 AM
#9
I fixed it, there was some wiring I had overlooked that I removed earlier because I couldn't take out the GPU—it was hidden under it. I took out that wiring so I could remove the GPU. Then I put it back in and it booted up. Thanks for sharing this info. Just re-reading everything you said helped me remember😓. My mistake if I wasted your time.
N
NerdTrooper
03-17-2024, 08:11 AM #9

I fixed it, there was some wiring I had overlooked that I removed earlier because I couldn't take out the GPU—it was hidden under it. I took out that wiring so I could remove the GPU. Then I put it back in and it booted up. Thanks for sharing this info. Just re-reading everything you said helped me remember😓. My mistake if I wasted your time.

D
DoubleOhNothin
Junior Member
7
03-17-2024, 10:04 AM
#10
But after removing the GPU and restarting, the display appeared as usual. What CPU and motherboard are these?
D
DoubleOhNothin
03-17-2024, 10:04 AM #10

But after removing the GPU and restarting, the display appeared as usual. What CPU and motherboard are these?

Pages (2): 1 2 Next