Question Installed ssd m2 and now pc never boots anymore (no signal black screen)
Question Installed ssd m2 and now pc never boots anymore (no signal black screen)
Help me, I need to work…
Details: motherboard b360m aorus gaming
Attempted to install an m2 ssd pcie 500g
Installed it using the special screw
Booted up and the PC shut off every 3 seconds
Resettled BIOS by removing the battery
Now it starts normally but there’s no screen (black, no signal)
Removed the SSD and screws
Swapped in new RAM
Reset BIOS through those two pins
Tried connecting the HDMI of the monitor to the CPU instead of the GPU
Everything ended up the same
Leds and fans are always on (CPU fans also on)
Appreciate your help ahead of time
Welcome to the forums, newcomer!
When sharing a troubleshooting thread, make sure to provide your complete system details. List them clearly as follows:
CPU:
CPU cooler:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Include the age of the PSU, along with its make and model.
BIOS version for your motherboard at this time.
Installed it (with the special screw).
You may want to attach photos of the SSD installation.
Tried connecting the HDMI of the monitor to the CPU instead of the GPU.
If you have an F SKU processor, display output won’t appear from the motherboard because there’s no integrated GPU on the chipset.
Swapped the RAM – it should be fitting in slots A2 and B2. If using one stick, go for slot A2.
I removed the SSD and its screws.
Which slot did you use to insert the SSD?