Question DRAM and CPU lights flashing.
Question DRAM and CPU lights flashing.
I've had a PC running for months and today I decided to organize the cables in the case. After reassembling everything, the PC wouldn't start and the DRAM and CPU lights would flash repeatedly. I removed the heat sink and took out the CPU while moving cables, so I think that's where the issue lies.
I tried booting with individual RAM sticks, but it didn't work.
Is my CPU damaged? What else should I try?
Starting with removing the CPU and inspecting for bent pins on the CPU or motherboard would be a suitable initial step. This is often the most frequent cause of such issues once the CPU has been taken out. CPU can also lead to DRAM light issues, not just memory problems.
https://imgur.com/a/diGS6uB
View: https://imgur.com/a/diGS6uB
Here's all I could really see. This was captured on my phone camera so I realize its difficult to see. As for as you can tell are these bent pins on the MOBO?
Thanks.
you really can't fix bent pins much without a micrope or magnifying glass. i don't know why you took out the cpu just in case the cooler matters.
Repairing bent pins on a motherboard is uncommon. It's usually worth attempting, as the chances of success are low, but it might be worthwhile in some situations. You typically have to replace the board if you bend pins. However, bent pins on a CPU are somewhat more likely to be fixable, provided the pin isn't completely detached below the surface. My guess is you'd probably need a new board. Changing the paste on a CPU is only necessary if someone has thoroughly damaged it beforehand or if you're switching boards or CPUs.