F5F Stay Refreshed Hardware Desktop Question Active USB caused the failure of two CPUs within a span of two days.

Question Active USB caused the failure of two CPUs within a span of two days.

Question Active USB caused the failure of two CPUs within a span of two days.

A
AXDeadXMidget
Member
55
12-09-2016, 11:04 AM
#1
Delock Products 83415 Delock Cable USB 5 Gbps Extension, active 10 m is being used. I visited their website to confirm it’s the recommended and tested version. However, I’ve experienced two power supplies failing in just two days. The cable seems to be causing the issue. When connected, the power plug light on the cable lights up, indicating it’s receiving power even when not physically connected. Before the PSUs stopped working, the cable functioned properly and the scanner operated normally. Is the cable defective? I’m concerned about its quality since I invested a lot. Should I unplug it when not in use?
A
AXDeadXMidget
12-09-2016, 11:04 AM #1

Delock Products 83415 Delock Cable USB 5 Gbps Extension, active 10 m is being used. I visited their website to confirm it’s the recommended and tested version. However, I’ve experienced two power supplies failing in just two days. The cable seems to be causing the issue. When connected, the power plug light on the cable lights up, indicating it’s receiving power even when not physically connected. Before the PSUs stopped working, the cable functioned properly and the scanner operated normally. Is the cable defective? I’m concerned about its quality since I invested a lot. Should I unplug it when not in use?

Y
yolosolohi48
Member
167
12-18-2016, 03:29 PM
#2
Do you have the complete system specifications, along with the brand and model of the power supply unit?
Y
yolosolohi48
12-18-2016, 03:29 PM #2

Do you have the complete system specifications, along with the brand and model of the power supply unit?

A
206
12-23-2016, 06:18 PM
#3
PSUs that were used:
1. Enhance ENP-7660B (600w)
2. EVGA 450W3
Construction:
Intel Core i7-4790 3.6 GHz Quad-Core Processor
MSI H81I Mini ITX LGA1150 Motherboard
Mushkin Stealth 16 GB (2 x 8 GB) DDR3-1600 CL9 Memory
Samsung 850 Evo 500 GB 2.5" Solid State Drive
PNY VCQP600-PB Quadro P600 2 GB Video Card
A
Anthony69edher
12-23-2016, 06:18 PM #3

PSUs that were used:
1. Enhance ENP-7660B (600w)
2. EVGA 450W3
Construction:
Intel Core i7-4790 3.6 GHz Quad-Core Processor
MSI H81I Mini ITX LGA1150 Motherboard
Mushkin Stealth 16 GB (2 x 8 GB) DDR3-1600 CL9 Memory
Samsung 850 Evo 500 GB 2.5" Solid State Drive
PNY VCQP600-PB Quadro P600 2 GB Video Card

I
Ilia_Zer0
Member
224
12-23-2016, 07:37 PM
#4
Do you rely on the Navilock external power supply they offer to operate it?
I
Ilia_Zer0
12-23-2016, 07:37 PM #4

Do you rely on the Navilock external power supply they offer to operate it?

B
baud2001
Junior Member
11
12-23-2016, 09:08 PM
#5
No, that adapter won't function in my area. I'm using this one:
5V 2A 10W Power Adapter for USB Hubs 3.4mm x 1.3mm - $5.39 - JacobsParts Inc
5V 2A 10W Power Adapter for USB Hubs 3.4mm x 1.3mm - $5.39 - JacobsParts.com offers a range of electronics items such as computer components, LED lighting, cables, hand tools, and more.
www.jacobsparts.com
However, I recently discovered the problem. I accidentally unplugged the connected external power supply. The computer started on its own. After turning it off and back on manually, it worked properly. I tried using other PSUs to test. Everything is now functioning correctly.
Thank you for your assistance. Apologies if it took your time. This situation was unusual; I haven't encountered anything like this before. Going ahead, I plan to connect only the powered USB after the computer is on and only when necessary for the 3D scanner.
B
baud2001
12-23-2016, 09:08 PM #5

No, that adapter won't function in my area. I'm using this one:
5V 2A 10W Power Adapter for USB Hubs 3.4mm x 1.3mm - $5.39 - JacobsParts Inc
5V 2A 10W Power Adapter for USB Hubs 3.4mm x 1.3mm - $5.39 - JacobsParts.com offers a range of electronics items such as computer components, LED lighting, cables, hand tools, and more.
www.jacobsparts.com
However, I recently discovered the problem. I accidentally unplugged the connected external power supply. The computer started on its own. After turning it off and back on manually, it worked properly. I tried using other PSUs to test. Everything is now functioning correctly.
Thank you for your assistance. Apologies if it took your time. This situation was unusual; I haven't encountered anything like this before. Going ahead, I plan to connect only the powered USB after the computer is on and only when necessary for the 3D scanner.