Question about removing the cooling fan.
Question about removing the cooling fan.
Hi, I've had this old computer system for more than ten years, lying in my store room for about five to six years. Recently, I decided to take it apart to check what's inside (it doesn't power on). I carefully removed everything except I'm struggling to locate the screws for the Intel A80852-001 cooling fan. I'm not sure how to get rid of it. Can anyone assist me with this?
No nuts, two white leaves shift to the opposite side and release plastic hooks from the socket.
Warning, after all this time the heat transfer paste is likely dried and much cooler, almost stuck to the CPU.
No nuts, two white leaves shift to opposite spots and release plastic hooks from the socket.
Warning, after all this time the heat transfer paste is likely dried and the component feels cooler than usual. Gently move the cooler left and right. In severe situations, consider taking out the entire plastic fan holder and using a hair dryer to warm the heat sink.
https://imgur.com/a/5oRy8HA
View: https://imgur.com/a/5oRy8HA
Welcome to the forums, new member!
On either side there is a lever you can shift to the opposite locking positions, release the pressure on the cooling mount, and then the cooler should detach.
Thanks for your help, I had to take out the plastic fan holder and perform some twisting, but it came off 😆. Appreciate the support!