Question about overclocking (first time)
Question about overclocking (first time)
I'm finalizing my setup and have a few questions. I don't intend to overclock immediately, but I want to be ready when the time comes. With the motherboard I'm using, does it support auto-overclocking or are there options to choose from for the overclock settings I'd like to try? I think there might be a simple setup program designed for beginners like me. Of course, this is my first build and I'm aiming to get it right on the first attempt. I'm not trying to push the CPU beyond its limits just a bit more, but staying within a safe range is important. If my cooler isn't performing well, please let me know or suggest any adjustments needed so everything works smoothly with this build.
There will be a slight weight at the front of the motherboard, but a mounting bracket on the back will provide support. I haven’t encountered a situation where a cooler detaches from a motherboard while the computer is running, except during shipping. If the Dark Rock Pro 3 is too bulky, the Cryorig H7 might be a better option. It’s labeled a budget cooler but should allow for solid overclocking. Expect around 4.4 to 4.5 CFM minimum, depending on the CPU.
The build looks very good. For overclocking, I’d avoid any programs or presets that claim higher voltage than required, as they usually aren’t necessary. I’ll just follow CPU overclocking instructions in BIOS manuals; it’s likely someone will write an article about my exact CPU soon. On another note, not all CPUs overclock equally, so it often comes down to trial and error. The Intel Temperature Guide by Computronix is also worth checking—it offers useful tips on testing and software selection. Choosing the right cooler isn’t essential; a high-end air cooler like the be Quiet Dark Rock Pro 3 would work well for overclocking and could save some money. PCPartPicker part list
ROG series boards are meant for overclocking, correct.
The board should include some built-in default overclock settings; check the manual. I recall my older Z87 Hero had something similar, like an AI Tuner. These are suitable for testing, but you should fine-tune your own overclock to avoid excessive voltage.
Since Skylake and Kabylake look almost the same, you can rely on a Z170/Skylake overclocking guide. Overclock.net typically provides a solid resource.
The build looks great overall. For overclocking, it’s best to avoid any programs or presets that claim higher voltages than required, as they usually operate at a higher voltage than needed. I’ll probably look into CPU overclocking instructions in BIOS manuals; it might become easier to find articles about my specific CPU in the future. On another note, not all CPUs overclock equally, so it often comes down to trial and error. The Intel Temperature Guide by Computronix is also a useful resource for understanding testing methods and software options. Choosing the cooler isn’t essential, and a high-end air cooler like the be Quiet Dark Rock Pro 3 would suffice to overclock the CPU while saving some money. PCPartPicker part list
It may not work since those look taller then the LPX versions (no LED). You would be fine with a AIO cooler but just to let you know that it will probably run louder then most good air coolers and there's always the very rare chance it may leak and damage your other parts. That being said I've had my Corsair AIO for a few years now with no issues but TBH it's quite audible.
WildCard999 :
It may not work since those look taller then the LPX versions (no LED). You would be fine with a AIO cooler but just to let you know that it will probably run louder then most good air coolers and there's always the very rare chance it may leak and damage your other parts. That being said I've had my Corsair AIO for a few years now with no issues but TBH it's quite audible.
The be quiet cooler, will it put alot of strain on the mobo cause of the weight?
There will be a slight weight at the front of the motherboard, but there is a mounting bracket on the back to provide support. I haven’t come across a cooler that detaches from a motherboard while the computer is running, except when it’s being shipped. If the Dark Rock Pro 3 is too bulky, I’d look into the Cryorig H7. It’s seen as a budget option but should be sufficient for decent overclocking on that CPU. Expect around 4.4 to 4.5 CFM minimum, though this can vary with the CPU.