F5F Stay Refreshed Hardware Desktop Question about memory optimization techniques

Question about memory optimization techniques

Question about memory optimization techniques

M
ManMallow
Member
Find
223
05-02-2016, 03:18 AM
#1
You're facing an issue where your PC won't boot after trying to optimize the RAM speed. Since you're new to hardware tuning, here are some steps you can try:

- Check for any BIOS updates that might resolve compatibility issues.
- Ensure all connections are secure and properly seated.
- Try resetting the system to factory settings and then reconfigure it.
- Use a different RAM module to rule out faulty hardware.
- Consult the Corsaid Vengeance LPX manual for specific guidance on overclocking.

If problems persist, consider reaching out to a professional technician for further assistance.
Reply
Reply
M
ManMallow
05-02-2016, 03:18 AM #1

You're facing an issue where your PC won't boot after trying to optimize the RAM speed. Since you're new to hardware tuning, here are some steps you can try:

- Check for any BIOS updates that might resolve compatibility issues.
- Ensure all connections are secure and properly seated.
- Try resetting the system to factory settings and then reconfigure it.
- Use a different RAM module to rule out faulty hardware.
- Consult the Corsaid Vengeance LPX manual for specific guidance on overclocking.

If problems persist, consider reaching out to a professional technician for further assistance.

Reply
Reply
B
Broflash
Senior Member
Find
740
05-02-2016, 04:12 AM
#2
No, I don't rely on XPM profiles or manual overclocking.
Reply
Reply
B
Broflash
05-02-2016, 04:12 AM #2

No, I don't rely on XPM profiles or manual overclocking.

Reply
Reply
B
Bopler
Member
Find
131
05-02-2016, 04:25 AM
#3
Lowering the delay starts with the first-gen Ryzen's memory chip. High-speed RAM won't be quick right away, so you might have to adjust its speed settings. A DDR4 3000 with a 14V power supply could provide solid performance.
Reply
Reply
B
Bopler
05-02-2016, 04:25 AM #3

Lowering the delay starts with the first-gen Ryzen's memory chip. High-speed RAM won't be quick right away, so you might have to adjust its speed settings. A DDR4 3000 with a 14V power supply could provide solid performance.

Reply
Reply
K
Killa_Dx
Senior Member
Find
645
05-02-2016, 01:02 PM
#4
Was die 1600af wirklich eine zweite Generation darstellt oder nur die Hardware auf Silizium basiert?
Reply
Reply
K
Killa_Dx
05-02-2016, 01:02 PM #4

Was die 1600af wirklich eine zweite Generation darstellt oder nur die Hardware auf Silizium basiert?

Reply
Reply
S
skovbo1801
Member
Find
186
05-02-2016, 06:02 PM
#5
Yes, it's the same generation. The improvements in Zen to Zen+ were modest, moving from around 3000MHz to about 3200MHz.
Reply
Reply
S
skovbo1801
05-02-2016, 06:02 PM #5

Yes, it's the same generation. The improvements in Zen to Zen+ were modest, moving from around 3000MHz to about 3200MHz.

Reply
Reply
A
AER0D
Member
Find
55
05-11-2016, 11:27 PM
#6
Consider testing 3000 or 3200 to determine what works best.
Reply
Reply
A
AER0D
05-11-2016, 11:27 PM #6

Consider testing 3000 or 3200 to determine what works best.

Reply
Reply
K
kitkat0728
Junior Member
Find
4
06-02-2016, 05:52 AM
#7
That's a straightforward option.
Reply
Reply
K
kitkat0728
06-02-2016, 05:52 AM #7

That's a straightforward option.

Reply
Reply
N
npalmen
Member
Find
202
06-02-2016, 02:10 PM
#8
Thank you! It wasn't crucial for me, I was just curious. I typically handle stock when setting up my PCs.
Reply
Reply
N
npalmen
06-02-2016, 02:10 PM #8

Thank you! It wasn't crucial for me, I was just curious. I typically handle stock when setting up my PCs.

Reply
Reply