Question about Hyper 212 EVO

ZBoobie
Member

144

11-19-2016, 02:08 PM

I put in my 212 EVO recently and when I exert a specific pressure on it, it shifts slightly...is this typical?

ZBoobie

11-19-2016, 02:08 PM #1

I put in my 212 EVO recently and when I exert a specific pressure on it, it shifts slightly...is this typical?

yArthur
Member

169

11-19-2016, 10:45 PM

I adjusted them to the maximum extent...it shifts roughly a centimeter. I think it’ll become visible once you verify the temperatures... Yeah, you should be okay as long as the readings are normal.

yArthur

11-19-2016, 10:45 PM #2

I adjusted them to the maximum extent...it shifts roughly a centimeter. I think it’ll become visible once you verify the temperatures... Yeah, you should be okay as long as the readings are normal.

samigurl0903
Senior Member

603

12-08-2016, 06:26 PM

Yeah, my Pure Rock cooler does that. If it isn't more than a centimeter you should be fine but try tightening your mounting screws for good measure.

samigurl0903

12-08-2016, 06:26 PM #3

Yeah, my Pure Rock cooler does that. If it isn't more than a centimeter you should be fine but try tightening your mounting screws for good measure.

DinglyDongg
Member

174

12-15-2016, 02:39 AM

I adjusted them to their maximum extent....it shifts roughly a centimeter....I bet it'll become visible when you review the temperatures...

DinglyDongg

12-15-2016, 02:39 AM #4

I adjusted them to their maximum extent....it shifts roughly a centimeter....I bet it'll become visible when you review the temperatures...

Premier_Inigo
Junior Member

12-16-2016, 01:04 PM

I adjusted them to the maximum extent...it shifts roughly a centimeter...I think it'll become visible once you review the temperatures...

Premier_Inigo

12-16-2016, 01:04 PM #5

I adjusted them to the maximum extent...it shifts roughly a centimeter...I think it'll become visible once you review the temperatures...

xXImTheAngelXx
Member

12-22-2016, 02:28 PM

This model stands out among similar options because of its design features. The mounting system on the 212 supports sliding and slight rotation, which is beneficial. Many users appreciate the performance and affordability of the Hyper 212, but they often face limitations when trying to access memory near the CPU.

xXImTheAngelXx

12-22-2016, 02:28 PM #6

ripa5000
Posting Freak

884

12-22-2016, 03:18 PM

This couple paired with my OCD means I have to take apart everything and put it back together again. If I understood it right, I’d have chosen a different cooler instead. Let’s check the temperatures first...

ripa5000

12-22-2016, 03:18 PM #7