F5F Stay Refreshed Hardware Desktop Question about CPU performance and memory usage in MB.

Question about CPU performance and memory usage in MB.

Question about CPU performance and memory usage in MB.

Z
zaodog
Junior Member
Find
12
07-10-2018, 05:50 PM
#1
I’m preparing a motherboard swap from an old B450M-IBW board to a Prime B450-A II. Everything came out without trouble. I removed the CPU and it was still attached to the cooler. I checked all the pins and everything seems okay. The main question is: do I need thermal paste when installing the CPU on my new board? Specifically, can I install the cooler and CPU together without taking the processor off the cooler? I didn’t remove the switch from the old board, so I’m a bit unsure but want to be sure. Thanks!
Reply
Reply
Z
zaodog
07-10-2018, 05:50 PM #1

I’m preparing a motherboard swap from an old B450M-IBW board to a Prime B450-A II. Everything came out without trouble. I removed the CPU and it was still attached to the cooler. I checked all the pins and everything seems okay. The main question is: do I need thermal paste when installing the CPU on my new board? Specifically, can I install the cooler and CPU together without taking the processor off the cooler? I didn’t remove the switch from the old board, so I’m a bit unsure but want to be sure. Thanks!

Reply
Reply
S
Soccerdude0
Member
Find
106
07-10-2018, 07:33 PM
#2
It’s best to apply thermal paste carefully and follow proper steps to avoid any damage.
Reply
Reply
S
Soccerdude0
07-10-2018, 07:33 PM #2

It’s best to apply thermal paste carefully and follow proper steps to avoid any damage.

Reply
Reply
A
AdamKoudy
Senior Member
Find
740
07-19-2018, 02:21 AM
#3
It’s better to keep the paste applied unless your CPU needs updating.
Reply
Reply
A
AdamKoudy
07-19-2018, 02:21 AM #3

It’s better to keep the paste applied unless your CPU needs updating.

Reply
Reply
R
RoseJr
Member
Find
244
07-19-2018, 05:44 AM
#4
This looks like a task for a modern setup, so you should be able to handle it effectively.
Reply
Reply
R
RoseJr
07-19-2018, 05:44 AM #4

This looks like a task for a modern setup, so you should be able to handle it effectively.

Reply
Reply
B
Blureux
Posting Freak
Find
797
08-04-2018, 02:54 AM
#5
I don't reuse thermal paste. It's affordable, but computer components cost a lot. Some claim it can be used again if the heat performance is still adequate, though your temperatures might not improve much. If you choose to try it, compare your temps after use—both when idle and under load.
Reply
Reply
B
Blureux
08-04-2018, 02:54 AM #5

I don't reuse thermal paste. It's affordable, but computer components cost a lot. Some claim it can be used again if the heat performance is still adequate, though your temperatures might not improve much. If you choose to try it, compare your temps after use—both when idle and under load.

Reply
Reply
X
xBlqzex
Member
Find
61
08-13-2018, 07:00 AM
#6
I’ll order the thermal paste. The issue is a pin is bent at the corner—align it carefully with the socket without damaging any others.
Reply
Reply
X
xBlqzex
08-13-2018, 07:00 AM #6

I’ll order the thermal paste. The issue is a pin is bent at the corner—align it carefully with the socket without damaging any others.

Reply
Reply
L
levoyageur92
Posting Freak
Find
807
08-15-2018, 08:50 AM
#7
Are you referring to one of the CPU pins being slightly bent? If it's near the socket, it should work fine. If it requires tweaking, use a fine tool like small tweezers carefully. The issue is avoiding any damage. Just ensure it fits snugly; otherwise, it might come out. Minor adjustments are usually manageable.
Reply
Reply
L
levoyageur92
08-15-2018, 08:50 AM #7

Are you referring to one of the CPU pins being slightly bent? If it's near the socket, it should work fine. If it requires tweaking, use a fine tool like small tweezers carefully. The issue is avoiding any damage. Just ensure it fits snugly; otherwise, it might come out. Minor adjustments are usually manageable.

Reply
Reply