Q9400 Auto OC
Q9400 Auto OC
After I restarted the BIOS, my CPU started auto-occluding itself...I don’t know why.
P.S.: Sorry if I ended up in the wrong forum.
My FSB is 400MHz/1600MHz (400x8=3.2GHz CPU). The stock is 333MHz/1333MHz (333x8=2.66GHz CPU). Voltage remains at stock, which is fine. FREE SPEED!!!
I'd keep it where it stands as long as your FSB:RAM multiplier keeps RAM running at the correct speed. Otherwise, it's completely safe.
My FSB is 400MHz/1600MHz (400x8=3.2GHz CPU). The stock is 333MHz/1333MHz (333x8=2.66GHz CPU). Voltage remains at the original setting, which is fine. FREE SPEED!!!
I'd keep it as is if your FSB:RAM ratio still allows RAM to run at the correct speed. Otherwise, it's completely safe.
No worries, just verify the temperatures under full load. (Do a stress test in cpu-z in the bench tab if you don’t have prime95 or orthos64.)
It’s great to see the 775 platform running.
Thank you, it is operating correctly.
It seems suitable at 70°C.
Can I remove the ventilator and clean the dust around it? (I'm worried about damaging it.)