PS3 coolers do not spin correctly after being fully installed.
PS3 coolers do not spin correctly after being fully installed.
It seems like the cold square is likely obstructing something.
Yep. Just adding another possiblity since it's sounds weird to me if the fan spins freely if turned upside down but not otherwise, while detached from the heatsink.. It's like hearing a PC case fan that only spins when it's installed facing upwards/downwards.
It might be the fan failing due to a faulty bearing, and replacing it with a new one could also fix the problem
You're wondering if you should use something resembling paper towels as a support. Let's explore your options—checking which side of the heatsink affected the fan, seeing if it stays aligned or shifts often, and deciding whether a fix is possible or if you'll need to install a shim on the fan module.
It hasn't been flipped and it's rotating the issue, so it might be the heatsink again. Try to lock that first, then you shouldn't have to adjust it later.
I didn't come up with one. I made a washer around the nail (hope the translator is correct) and secured the cooler. lv_0_20250613155858.mp4 Is that okay? I'm considering sealing the bulge with Scotch.
The simplest spacers are screw washers, layered when necessary and positioned in between. To seal the gap, you can use a heat-resistant adhesive tape. Keep in mind you'll need to remove the residue later. For now, power on the PS3 without the outer casing and check functionality. If it works, move on to installing the outer cover.