F5F Stay Refreshed Hardware Desktop Profile unavailable on MOBO platform

Profile unavailable on MOBO platform

Profile unavailable on MOBO platform

X
xbnw
Member
96
11-05-2021, 07:27 PM
#1
Hello everyone, I have two 24GB DDR5 6000Mhz modules and the manufacturer specifies the EXPO profile should read 48-48-48-88. I’m using an MSI B650i EDGE with a BIOS from July 6th, 2024. For EXPO profile 1 only 48-48-48-96 is available, which prevents the computer from posting to the display and required a CMOS reset. Any advice would be really helpful. Thanks!
X
xbnw
11-05-2021, 07:27 PM #1

Hello everyone, I have two 24GB DDR5 6000Mhz modules and the manufacturer specifies the EXPO profile should read 48-48-48-88. I’m using an MSI B650i EDGE with a BIOS from July 6th, 2024. For EXPO profile 1 only 48-48-48-96 is available, which prevents the computer from posting to the display and required a CMOS reset. Any advice would be really helpful. Thanks!

M
Magic_Wolf_
Senior Member
530
11-06-2021, 03:20 AM
#2
CL48 has some issues... If it's missing from the Expo menu, adjust the settings in BIOS. Otherwise, consider adding a small DRAM voltage—around 1.4V, up to 1.45V if necessary.
M
Magic_Wolf_
11-06-2021, 03:20 AM #2

CL48 has some issues... If it's missing from the Expo menu, adjust the settings in BIOS. Otherwise, consider adding a small DRAM voltage—around 1.4V, up to 1.45V if necessary.

D
Deadkill78
Junior Member
35
11-06-2021, 03:35 AM
#3
No, you don’t need to keep Expo Profile 1 selected. Just adjust the timing settings as needed.
D
Deadkill78
11-06-2021, 03:35 AM #3

No, you don’t need to keep Expo Profile 1 selected. Just adjust the timing settings as needed.

A
arianed2001
Member
57
11-06-2021, 11:14 AM
#4
Expo follows set schedules, but you're welcome to begin here and modify it. Suggest trying 5600MHz.
A
arianed2001
11-06-2021, 11:14 AM #4

Expo follows set schedules, but you're welcome to begin here and modify it. Suggest trying 5600MHz.