Problems with overclocking A10-7870K
Problems with overclocking A10-7870K
Hi everyone!
I was thinking about adding an RX 480 to my APU setup, but I haven’t finalized the choice yet. Until more DX12 Multi Adapter titles are released, the onboard GPU won’t be fully utilized, so I turned it off in the BIOS and allocated extra memory for the iGPU. I also opted to overclock the CPU, letting AMD’s Overdrive Utility handle the clocking and stress tests, which stabilized at 4.2 GHz. I turned off Turbo Mode and set the maximum speed to 4.2 GHz in BIOS, restarted, and ran a more intense stress test. After that, I noticed something unusual: the CPU was only operating at about 70% capacity. When I opened Resource Manager, cores 0-1 were running at 4.2 GHz, while cores 2-3 were stuck at 2.86 GHz. I tried Overdrive again, and when manually setting the clocks, all cores matched the higher speed. Why do the other two cores lag behind during startup? I’ve confirmed the CPU temperature stayed around 62°C during stress testing.
System Specs:
AMD A10-7870K (@1.7-4.2 GHz)
Cryorig C7 Low Profile Cooler (@full speed, usually)
2 x 4GBs Kingston Beast DDR3 2400MHz RAM (BIOS OC’d)
Gigabyte F2A88XN-WIFI mITX Motherboard (BIOS rev. F5)
ASUS R7 250X 2GB (soon to be an RX 480 variant)
Silverstone SFX 450W Bronze Non-Modular Power Supply
Test the CPU load using prime95 to ensure all cores are active. If the issue continues, it’s likely due to excessive power delivery for that MB, which isn’t ideal for mITX and probably not suitable for overclocking. You don’t have to turn off the APU to recover memory—just initialize PCIE graphics first. With a powerful GPU such as the RX 480, there will be no real advantage in pairing it with your APU, as the performance gain would be minimal and the added complexity unnecessary.
Testen Sie die CPU-Auslastung mit Prime95, um sicherzustellen, dass alle Kerne aktiviert sind. Falls dies nicht funktioniert, ist es wahrscheinlich, dass das Problem mit der Leistungsversorgung zusammenhängt, was darauf hindeutet, dass es sich eher um ein mITX-Gerät handelt, das nicht für Overclocking ausgelegt ist.
Sie müssen die APU nicht deaktivieren, um den Speicher wiederherzustellen. Setzen Sie sie lediglich so, dass die PCIE-Grafik initialisiert wird.
Mit einem leistungsstarken GPU wie der RX 480 wird der Nutzen bei der Nutzung der APU nicht sichtbar sein. Die zusätzlichen Kosten wären zu hoch.
Ich habe Prime95 für den Stresstest verwendet und dabei die beschriebenen Probleme berücksichtigt. Da AMD's Overdrive die Taktfrequenzen auf 4,2 GHz hält, sind die Fähigkeiten der Motherboard ausreichend.
Ich musste es deaktivieren, um alle Ressourcen zurückzubekommen. Als Auto-Modus war sie mit 32 MB System-RAM initialisiert, aber da ich keine VRAM für die RX 480 nutze, ermöglicht das Deaktivieren den Zugriff auf den Speicher. Anfangs wurde mir 2 GB System-RAM für die VRAM zugewiesen. Jetzt, da es deaktiviert ist und keinen Wärmeverlust verursacht, konnte ich die CPU-Taktfrequenzen sicher erhöhen.