F5F Stay Refreshed Hardware Desktop Problems with Corsair RGB lighting.

Problems with Corsair RGB lighting.

Problems with Corsair RGB lighting.

P
Pug_Lover_Cony
Junior Member
12
12-31-2022, 10:55 AM
#1
You have RGB fans set up with six LL120 units on Commander Pro and an H100i AIO on Commander Core. The fans are working and spinning, but you can't control them in iCue despite being able to connect via USB headers and a USB passthrough. The issue seems to be with the Core not being recognized.
P
Pug_Lover_Cony
12-31-2022, 10:55 AM #1

You have RGB fans set up with six LL120 units on Commander Pro and an H100i AIO on Commander Core. The fans are working and spinning, but you can't control them in iCue despite being able to connect via USB headers and a USB passthrough. The issue seems to be with the Core not being recognized.

N
NylodnewgPlaZ
Member
187
01-02-2023, 07:12 AM
#2
Disconnect the fan from the Pro, then connect the AIO, and test it. It might mean the CORE is no longer functioning.
N
NylodnewgPlaZ
01-02-2023, 07:12 AM #2

Disconnect the fan from the Pro, then connect the AIO, and test it. It might mean the CORE is no longer functioning.

A
aureroux
Junior Member
17
01-02-2023, 08:49 AM
#3
Can't proceed, the AIO requires a 24-pin connector found only on Core. The fans linked to Core are spinning, and the LEDs on the AIO pump also illuminate, indicating Core is supplying power.
A
aureroux
01-02-2023, 08:49 AM #3

Can't proceed, the AIO requires a 24-pin connector found only on Core. The fans linked to Core are spinning, and the LEDs on the AIO pump also illuminate, indicating Core is supplying power.

W
warzhell
Member
63
01-02-2023, 04:23 PM
#4
I just discovered iCue 4 and was still using the older version (iCue 3) which didn't automatically update. Now everything is working properly with iCue 4.
W
warzhell
01-02-2023, 04:23 PM #4

I just discovered iCue 4 and was still using the older version (iCue 3) which didn't automatically update. Now everything is working properly with iCue 4.