F5F Stay Refreshed Software Operating Systems Problems during setup of Windows 7

Problems during setup of Windows 7

Problems during setup of Windows 7

R
Rombo_CZ
Junior Member
Find
4
08-04-2016, 05:24 AM
#1
I'm attempting to set up Windows 7 on an older laptop that's been through several OS updates. It started with Windows XP, moved to XP SP2, then Windows 7, and now is running Windows 10. The machine barely works after the switch, so I'm trying to reinstall Windows 7. I couldn't boot from a USB drive, so I transferred the HDD to another device and installed it there. When I reinserted the drive into this laptop, only a command prompt appeared. I ran a memory test and it passed. I changed the BIOS settings to use Legacy mode only (no BIOS options left). I also reset the CMOS, but I'm not sure what else to try.
Reply
Reply
R
Rombo_CZ
08-04-2016, 05:24 AM #1

I'm attempting to set up Windows 7 on an older laptop that's been through several OS updates. It started with Windows XP, moved to XP SP2, then Windows 7, and now is running Windows 10. The machine barely works after the switch, so I'm trying to reinstall Windows 7. I couldn't boot from a USB drive, so I transferred the HDD to another device and installed it there. When I reinserted the drive into this laptop, only a command prompt appeared. I ran a memory test and it passed. I changed the BIOS settings to use Legacy mode only (no BIOS options left). I also reset the CMOS, but I'm not sure what else to try.

Reply
Reply
A
Adabelle
Senior Member
Find
724
08-05-2016, 02:06 AM
#2
Some older laptops don't start from UBS sticks. Your device might be one of those. For such machines, booting from a DVD is necessary instead of a stick. Trying to install on another machine and then swapping drives isn't recommended. The operating system will come with drivers tailored for the specific hardware you used. If the chipset differs, it could lead to issues like a non-functional OS. The best approach is to place your Windows 7 installer on an empty DVD, insert it into the laptop tray, and begin installation that way. Once done, use the USB stick to add drivers later. Regarding drivers, confirm the exact CQ60 model you have—most likely, you'll need to install network drivers manually before Windows searches for the rest.
Reply
Reply
A
Adabelle
08-05-2016, 02:06 AM #2

Some older laptops don't start from UBS sticks. Your device might be one of those. For such machines, booting from a DVD is necessary instead of a stick. Trying to install on another machine and then swapping drives isn't recommended. The operating system will come with drivers tailored for the specific hardware you used. If the chipset differs, it could lead to issues like a non-functional OS. The best approach is to place your Windows 7 installer on an empty DVD, insert it into the laptop tray, and begin installation that way. Once done, use the USB stick to add drivers later. Regarding drivers, confirm the exact CQ60 model you have—most likely, you'll need to install network drivers manually before Windows searches for the rest.

Reply
Reply
G
Grifo24O
Member
Find
181
08-16-2016, 07:23 AM
#3
The laptop's CD drive wasn't functioning properly. I successfully connected a separate HDD with a working operating system. Then I transferred the extracted ISO of the Windows installation files into the empty internal HDD and installed it that way. It was quite a struggle, but at least the laptop is now running. The device is only worth around 20 pounds.
Reply
Reply
G
Grifo24O
08-16-2016, 07:23 AM #3

The laptop's CD drive wasn't functioning properly. I successfully connected a separate HDD with a working operating system. Then I transferred the extracted ISO of the Windows installation files into the empty internal HDD and installed it that way. It was quite a struggle, but at least the laptop is now running. The device is only worth around 20 pounds.

Reply
Reply