Problems after gpu oc attempt

F5F Stay Refreshed Power Users Overclocking Problems after gpu oc attempt

Pages (3): Previous 1 2 3

RulwenJr
Posting Freak

786

06-23-2016, 10:36 AM

#21

Restarts were limited to (because I'm overclocking on UD3R), due to RAM timings being set wrong, low voltage for the CPU, and low NB voltage. The likely cause is 12GB of RAM, using just one stick at a time. If mixing RAM, you should have two identical sticks; using one plus two doesn't work. I've experienced this on UD3R, but with mixed RAM it functions without issues.

RulwenJr

06-23-2016, 10:36 AM #21

HBROS1245
Member

179

06-23-2016, 11:36 AM

#22

I plan to attempt it after work using a RAM stick with one RAM slot. Although the previous configuration worked well, I’ll focus on a stress test with a larger RAM stick today.

HBROS1245

06-23-2016, 11:36 AM #22

I plan to attempt it after work using a RAM stick with one RAM slot. Although the previous configuration worked well, I’ll focus on a stress test with a larger RAM stick today.

JAWS0116
Junior Member

06-23-2016, 09:00 PM

#23

I take out the 4gb ram stick and keep the remaining 8gb inside. Unfortunately, after the stress test I had to reboot again, which means this mixed ram setup isn't helping.

JAWS0116

06-23-2016, 09:00 PM #23

I take out the 4gb ram stick and keep the remaining 8gb inside. Unfortunately, after the stress test I had to reboot again, which means this mixed ram setup isn't helping.

CattyO
Member

06-24-2016, 04:10 AM

#24

Hold on for more replies, I'm planning to purchase a new PSU because you've tried everything. But please wait a couple of days if you're willing to wait for more ideas, as this is really impressive for me.

CattyO

06-24-2016, 04:10 AM #24

crystal78248
Member

150

07-01-2016, 02:32 PM

#25

I changed psu. Ran stress test and everything worked. No reboot needed. I hope that was the sole issue.
Thanks for your assistance!

crystal78248

07-01-2016, 02:32 PM #25

I changed psu. Ran stress test and everything worked. No reboot needed. I hope that was the sole issue.
Thanks for your assistance!

Pages (3): Previous 1 2 3