F5F Stay Refreshed Power Users Overclocking Problemi7 4790k rallato a 4,6 Ghz non risolve.

Problemi7 4790k rallato a 4,6 Ghz non risolve.

Problemi7 4790k rallato a 4,6 Ghz non risolve.

Pages (2): 1 2 Next
E
Experimentl
Member
199
03-03-2016, 09:10 PM
#1
Hi,
I have an i7 4790K built with an Asus z97 A motherboard, EVGA 650W Gold PS, 2 x 8GB 2400 mhz DDR3 RAM, a Noctua D15S cooler, and two intake and exhaust fans.
I managed to reach a stable overclock of 4.6GHZ using RealBench at 1.215 CPU core voltage. Temperatures stay in the mid-70s during stress tests and reach the high 60s in games.
I’ve tried pushing to 4.7 but keep encountering BSODs no matter how much I increase the CPU voltage (even up to 1.35).
It’s odd that I’m stable at a lower voltage but can’t get to 4.7.
Are there any other BIOS settings I should adjust? Right now it’s set to manual with default values except for the multiplier and CPU core voltage.
Thanks !
E
Experimentl
03-03-2016, 09:10 PM #1

Hi,
I have an i7 4790K built with an Asus z97 A motherboard, EVGA 650W Gold PS, 2 x 8GB 2400 mhz DDR3 RAM, a Noctua D15S cooler, and two intake and exhaust fans.
I managed to reach a stable overclock of 4.6GHZ using RealBench at 1.215 CPU core voltage. Temperatures stay in the mid-70s during stress tests and reach the high 60s in games.
I’ve tried pushing to 4.7 but keep encountering BSODs no matter how much I increase the CPU voltage (even up to 1.35).
It’s odd that I’m stable at a lower voltage but can’t get to 4.7.
Are there any other BIOS settings I should adjust? Right now it’s set to manual with default values except for the multiplier and CPU core voltage.
Thanks !

C
62
03-15-2016, 09:36 PM
#2
Navigate to bios, select tweaker, then go to Asus Multi core enhancement set to Auto. Adjust the CPU Core ratio to Sync all cores, enter type 47 in the first line of the Core ratio limit and press enter. Change all CPU voltages to auto. You may also disable EPU power. Save and restart; your CPU voltage should be approximately 1.38 when using the auto setting.
C
Cute_Almond0v0
03-15-2016, 09:36 PM #2

Navigate to bios, select tweaker, then go to Asus Multi core enhancement set to Auto. Adjust the CPU Core ratio to Sync all cores, enter type 47 in the first line of the Core ratio limit and press enter. Change all CPU voltages to auto. You may also disable EPU power. Save and restart; your CPU voltage should be approximately 1.38 when using the auto setting.

J
JessiesCorpse
Junior Member
35
03-29-2016, 09:16 AM
#3
Checked realbench for 8 hours using that voltage—don’t think it’s stable there.
J
JessiesCorpse
03-29-2016, 09:16 AM #3

Checked realbench for 8 hours using that voltage—don’t think it’s stable there.

M
mentality_man
Member
123
04-06-2016, 03:35 AM
#4
I've been using it for two years...…
😊
Links: http://prntscr.com/pqa7g0 http://prntscr.com/pqa9ak
M
mentality_man
04-06-2016, 03:35 AM #4

I've been using it for two years...…
😊
Links: http://prntscr.com/pqa7g0 http://prntscr.com/pqa9ak

T
TempLate_YT
Senior Member
424
04-08-2016, 01:09 AM
#5
Sorry, my remark was addressed to the original poster mentioning a score of 4.6 at 1.2v.
T
TempLate_YT
04-08-2016, 01:09 AM #5

Sorry, my remark was addressed to the original poster mentioning a score of 4.6 at 1.2v.

K
KidzBeEz
Member
242
04-08-2016, 02:30 AM
#6
It's feasible, though 1.23 had inconsistent results on 4.6. I opted to let the motherboard manage the voltage because of the strong cooling conditions.
K
KidzBeEz
04-08-2016, 02:30 AM #6

It's feasible, though 1.23 had inconsistent results on 4.6. I opted to let the motherboard manage the voltage because of the strong cooling conditions.

B
BlazedScar
Member
156
04-27-2016, 07:59 AM
#7
Other than vcore, consider adjusting additional parameters as well.
B
BlazedScar
04-27-2016, 07:59 AM #7

Other than vcore, consider adjusting additional parameters as well.

Y
Yoyochti
Junior Member
15
04-27-2016, 12:47 PM
#8
If you prefer manual testing, try 1.36, 1.37, 1.38. The performance remains similar between 4.6 and 4.7, but the temperature rises noticeably.
Y
Yoyochti
04-27-2016, 12:47 PM #8

If you prefer manual testing, try 1.36, 1.37, 1.38. The performance remains similar between 4.6 and 4.7, but the temperature rises noticeably.

Z
Zzrobot
Junior Member
5
04-27-2016, 01:50 PM
#9
There’s a reason some people prefer running 8 hours of realbench for stability checks, while others find it unnecessary. Reinstalling the OS from scratch might be better if you want an extra 7 hours of testing.
Z
Zzrobot
04-27-2016, 01:50 PM #9

There’s a reason some people prefer running 8 hours of realbench for stability checks, while others find it unnecessary. Reinstalling the OS from scratch might be better if you want an extra 7 hours of testing.

H
Hammer967
Junior Member
10
04-28-2016, 12:32 AM
#10
Increase Load Line Calibration in short LLC, my 4790k required 1.41v for 4.7G
H
Hammer967
04-28-2016, 12:32 AM #10

Increase Load Line Calibration in short LLC, my 4790k required 1.41v for 4.7G

Pages (2): 1 2 Next