Problemas con el Wi-Fi de la ROG B550-F Gaming
Problemas con el Wi-Fi de la ROG B550-F Gaming
In the past few days things have been really stressful. I spent two weeks with family and left my PC off. After returning, it worked for about 12 hours before going black. I checked the cables and everything seemed fine. When I turned it back on, it stayed on for ten minutes then went black again. I decided to reinstall Windows and cleared everything, thinking it was brand new. It worked properly once installed, but after drivers and Wi-Fi setup it would freeze for a few seconds before blacking out. I’m guessing the power supply, motherboard or graphics card might be the issue. I’m in Vancouver, BC. If anyone wants to take a look, I’m running low on money because of rent, bills, and expensive food. I’m really confused and need advice.
When encountering this error, consider trying a different approach before a full reinstall. Instead of deleting everything, explore alternative methods such as using the startup options in the system menu. Press the power button, then use the left shift key for roughly 30 seconds to access the recovery screen. Navigate to startup settings and look for a safe mode option without networking. Adjust graphics or video settings to lower resolutions, which can disable third-party software conflicts. If these steps don’t resolve the issue, check thermal readings and consider using core temp software or booting into UEFI via specific keys.
If I understood how to handle this motherboard, I would try it. I’m unsure about adjusting graphics settings here. I can stay on the boot screen for a long time. After installing drivers, connecting to the internet causes a black screen. My thermal readings are normal too. While I was away, even though the PC was off, there might have been a slight brownout affecting the power supply or damaging the graphics card. I did all these steps before because I could access my BIOS without problems. I was worried something might have been saved in my files, so I deleted everything or thought an update error occurred, leading me to reinstall Windows 10. Right now I’m really confused and stressed. I’m planning to spend a lot of money at Canada Computers to fix this issue. It’s just too much pressure for me right now. The best options I have are replacing the GPU, switching to a new power supply, getting a fresh USB, and installing Windows 10 from a brand-new USB drive. Hopefully that will help.
I just described the process clearly, step by step. If you follow what I wrote, you’ll understand how to enter safe mode on Windows. It’s mainly about navigating through the recovery options, though it can feel confusing at first. From Windows 7 all the way to Windows 2000, you just press F8 when the system starts and then choose Safe Mode. Now you need to click through several menus, which makes it a bit more complicated. This happens in the recovery screen or startup area. It’s likely the software is tied to a specific hardware part, not the actual hardware itself. You’ve identified the problem! Just right-click the Start button (pretending to open a menu) or press the Windows key and X, then open Device Manager. Expand the display adapter list and right-click the item showing your video output. Select Disable it, then test your machine. It should run on full CPU power since there’s no integrated GPU or video card. This increases CPU usage, generates more heat, and reduces performance noticeably. Expect the display to flicker or slow down slightly. Even if it works for a while without losing clarity, this suggests the video driver is faulty and may need reinstallation. If the issue isn’t related to display software, try disabling network adapters in Device Manager and checking them there.