F5F Stay Refreshed Hardware Desktop Problem with yellow DRAM indicator...

Problem with yellow DRAM indicator...

Problem with yellow DRAM indicator...

X
Xytrixz
Senior Member
552
05-18-2022, 04:08 AM
#1
I purchased brand new RAM compatible with my BIOS, reset the flash storage, and refreshed the BIOS settings. Still facing issues posting. System: ASUS ROG B650E-I Ryzen 5 7600X RTX 3070 with two 16GB Corsair Vengeance 6400MHz DDR5 modules.
X
Xytrixz
05-18-2022, 04:08 AM #1

I purchased brand new RAM compatible with my BIOS, reset the flash storage, and refreshed the BIOS settings. Still facing issues posting. System: ASUS ROG B650E-I Ryzen 5 7600X RTX 3070 with two 16GB Corsair Vengeance 6400MHz DDR5 modules.

I
Imperfcti0n
Member
136
05-18-2022, 08:45 AM
#2
It depends on the device; some models can start up normally, while others may require additional settings like EXPO or XMP to function properly.
I
Imperfcti0n
05-18-2022, 08:45 AM #2

It depends on the device; some models can start up normally, while others may require additional settings like EXPO or XMP to function properly.

L
Llabros
Senior Member
740
05-18-2022, 03:35 PM
#3
It won’t display, which means I can’t access the BIOS.
L
Llabros
05-18-2022, 03:35 PM #3

It won’t display, which means I can’t access the BIOS.

C
cobelski
Junior Member
34
05-20-2022, 06:44 AM
#4
Sure, I can attempt it with a single stick.
C
cobelski
05-20-2022, 06:44 AM #4

Sure, I can attempt it with a single stick.

Y
ylyes4
Senior Member
572
05-22-2022, 04:45 AM
#5
Test each stick individually, switching them in turns. If your machine runs fine with another set, it might be a faulty kit. Providing a detailed spec sheet for your current system—including model numbers—would be useful, along with the specifications for the new RAM module.
Y
ylyes4
05-22-2022, 04:45 AM #5

Test each stick individually, switching them in turns. If your machine runs fine with another set, it might be a faulty kit. Providing a detailed spec sheet for your current system—including model numbers—would be useful, along with the specifications for the new RAM module.

R
RileyTheDino_
Junior Member
15
05-23-2022, 01:31 AM
#6
Attempted but didn't succeed.
R
RileyTheDino_
05-23-2022, 01:31 AM #6

Attempted but didn't succeed.

L
LeonieTheBear
Junior Member
14
05-24-2022, 10:55 AM
#7
Yes, I checked each stick in every slot.
L
LeonieTheBear
05-24-2022, 10:55 AM #7

Yes, I checked each stick in every slot.

L
ladybug022
Member
137
05-26-2022, 06:27 AM
#8
The previous setup also failed. That’s why I upgraded to new RAM. I assumed my current model wasn’t compatible with the motherboard.
L
ladybug022
05-26-2022, 06:27 AM #8

The previous setup also failed. That’s why I upgraded to new RAM. I assumed my current model wasn’t compatible with the motherboard.

P
prannce
Junior Member
15
05-27-2022, 01:51 PM
#9
Yes, you should clear any temporary settings before each attempt. Disconnect the power source, erase the flash memory if needed, and then retry.
P
prannce
05-27-2022, 01:51 PM #9

Yes, you should clear any temporary settings before each attempt. Disconnect the power source, erase the flash memory if needed, and then retry.

F
Fawx999
Junior Member
30
05-28-2022, 03:45 AM
#10
If the previous setup failed too, it might mean the board itself is faulty. Usually just reprogramming the CMOS will fix things. If you haven’t tried this yet, give it a go, but if neither of the two boards works and one had succeeded before, the issue is likely with the hardware.
F
Fawx999
05-28-2022, 03:45 AM #10

If the previous setup failed too, it might mean the board itself is faulty. Usually just reprogramming the CMOS will fix things. If you haven’t tried this yet, give it a go, but if neither of the two boards works and one had succeeded before, the issue is likely with the hardware.