Problem with UniFi USG 4 Pro and switch in US-50-500w mode affecting more than six devices.

F5F Stay Refreshed Power Users Networks Problem with UniFi USG 4 Pro and switch in US-50-500w mode affecting more than six devices.

natek2015
Member

199

03-20-2018, 08:50 PM

I'm working on expanding my network setup to add more ports for configuring a network or cluster. However, when I exceeded six ports, the devices weren't receiving internet access. Can I find a method to fully enable all switch ports so each device can connect and SSH with others?

natek2015

03-20-2018, 08:50 PM #1

xMaci3jx
Member

03-22-2018, 05:02 AM

Did you adjust the port configuration on any switch ports? Are you implementing VLANs? Ensure the link to the USG’s LAN uses the "All" port profile.

xMaci3jx

03-22-2018, 05:02 AM #2

Did you adjust the port configuration on any switch ports? Are you implementing VLANs? Ensure the link to the USG’s LAN uses the "All" port profile.

levo14
Member

247

03-31-2018, 11:20 PM

I didn't modify any port configurations. However, in the USG settings I activated the AutoScale feature.

levo14

03-31-2018, 11:20 PM #3

I didn't modify any port configurations. However, in the USG settings I activated the AutoScale feature.

MDosik
Junior Member

04-08-2018, 10:43 AM

I wouldn't rely on autoscale. Manually configure the subnet, such as a /24. Have you set up any extra networks or VLANs in the Unifi controller? Are you aiming for everything to reside within a single LAN subnet?

MDosik

04-08-2018, 10:43 AM #4

Okunino
Posting Freak

845

04-08-2018, 12:42 PM

I'm looking for guidance on configuring all devices on the same local network. There should be helpful guides or manuals to help with this setup.

Okunino

04-08-2018, 12:42 PM #5

I'm looking for guidance on configuring all devices on the same local network. There should be helpful guides or manuals to help with this setup.

ManMallow
Member

223

04-08-2018, 05:03 PM

Display the relevant network configuration images for the “LAN” settings. Clarify whether the switch port isn’t active, if devices eventually appear with IPs starting at 169.254, and how the placement of the seventh device affects connectivity. Confirm whether the initial six devices still receive internet access.

ManMallow

04-08-2018, 05:03 PM #6

Sukibooki
Member

204

04-10-2018, 03:05 PM

The problem involved the Network Adapters on both systems we attempted to link. We resolved it by swapping out the Network Adapters for those systems.

Sukibooki

04-10-2018, 03:05 PM #7

The problem involved the Network Adapters on both systems we attempted to link. We resolved it by swapping out the Network Adapters for those systems.