Problem with the new build not showing anything upon startup.
Problem with the new build not showing anything upon startup.
My old machine emitted a sizzling sound and began to emit smoke. I realized it was time to replace it with a new one. My current setup is as follows. I've been trying various solutions and nothing appears on the screen.
I attempted to update the BIOS using a flash drive, starting with a 16GB drive and then an 8GB one (do you need to reset your MOBO each time?). I received an A0 code when my SSD was connected from the old computer and then disconnected.
I also tried installing two different RAM modules, but the same issue persisted.
After simplifying it to just the CPU and RAM, I encountered an AD error code.
Gigabyte Z690 Aorus Pro (DDR5)
I7 13700k CPU
Corsair Dominator platinum RGb 32GB
Asus TUF 4070 TI OC Edition
check this link
https://bestofmotherboard.com/gigabyte-m...e_vignette
mentioned that the SSD in the old system was the issue.
The SSDs belonged to my previous machine.
850 Evo and 860 Evo models came with an unused M.2 slot on this computer.
they could have been hit, so try using the m2 as an os device without an sdd and check if it works.
I disconnected both SSDs and used only the M.2 in. still there was no display on my screen.
I purchased them in perfect condition and they looked brand new when I opened the boxes.
remove gpu and try with onboard one also make sure your ram is in compatibility list.
Check the BIOS settings to determine if IGPU is the first video device in the system.