Problem with the CPU fan not operating.
Problem with the CPU fan not operating.
Ensure additional fan headers are available on the motherboard for case fans. Insert the CPU cooler fan into one of these to verify its functionality. It’s highly probable this was the reason you decided to purchase a new cooler during your shopping trip.
fan quality varies a lot on the included cooler. they’re not getting much budget to source a reliable fan. the bearing starts to wear, which increases tolerances and lets more dust in, speeding up further damage. based on what you shared, it seems the unit is likely failing or nearly done before cleaning. four years is a reasonable lifespan for a fan—nobody wins forever, lol.
I used a 3HP industrial compressor during clearing. Perhaps the dirt was clogging the fan. Honestly, it seemed like a cheap fan that came without the CPU—it lasted about four and a half years. I always wanted to upgrade the CPU fan for better performance, but it didn’t keep things cool. Should I consider a dual fan cooler from Cooler Master?
Depends on your needs—generally I’d prefer more affordable options since even budget single-tower coolers can perform well. What level of improvement are you aiming for?
From a value perspective, Thermalright coolers stand out as the best choice right now. For those seeking a slight upgrade, expect around five cents more compared to standard models—find them for about $20 to $25. If you aim for significant performance gains, the Thermalright Peerless Assassin is the way to go.
This year summer hit a high of 50°C in Southeast Asia. I'm working on full-time solo game development with a limited budget. I'm looking for something that performs well, costs little, and lasts for at least two years. I'll check out the video you shared.
It appears more affordable than the water cooler you were considering, and offers improved performance. The main concern is whether it will fit your PC. You'll need to check the dimensions carefully. Regarding the CPU fan, past removal caused the chip to detach from the board with bent pins. To avoid overheating when it's off, try gently prying the old fan out without forcing it, and use a soft tool to separate the pins carefully.