F5F Stay Refreshed Hardware Desktop Problem with RAM speed at 2133 MHz

Problem with RAM speed at 2133 MHz

Problem with RAM speed at 2133 MHz

A
Amegahoney
Posting Freak
Find
789
08-10-2018, 02:15 AM
#1
Updates: Motherboard model ROG Strix B450-F, CPU AMD Ryzen 7 2700X, RAM Corsair Vengence LXP (DDR4, 16 GB, 3000 MHz). After assembling today, my RAM remains capped at 2133 MHz. I've already checked BIOS updates and adjusted the base frequency to 3000, but each change triggers a reset error warning about boot issues. I've looked online for fixes but haven't found a reliable solution yet.
Reply
Reply
A
Amegahoney
08-10-2018, 02:15 AM #1

Updates: Motherboard model ROG Strix B450-F, CPU AMD Ryzen 7 2700X, RAM Corsair Vengence LXP (DDR4, 16 GB, 3000 MHz). After assembling today, my RAM remains capped at 2133 MHz. I've already checked BIOS updates and adjusted the base frequency to 3000, but each change triggers a reset error warning about boot issues. I've looked online for fixes but haven't found a reliable solution yet.

Reply
Reply
D
dianarose32129
Senior Member
Find
570
08-11-2018, 11:43 PM
#2
Ensure DOCP/XMP is activated to allow voltage and timing adjustments to function properly.
Reply
Reply
D
dianarose32129
08-11-2018, 11:43 PM #2

Ensure DOCP/XMP is activated to allow voltage and timing adjustments to function properly.

Reply
Reply
S
Stainbes
Junior Member
Find
48
08-19-2018, 08:35 PM
#3
The memory he received seems quite insufficient, could this be the problem? He needs a minimum of 3200Mhz, since AMD tends to be picky about lower speeds.
Reply
Reply
S
Stainbes
08-19-2018, 08:35 PM #3

The memory he received seems quite insufficient, could this be the problem? He needs a minimum of 3200Mhz, since AMD tends to be picky about lower speeds.

Reply
Reply
M
MettaloCaft
Senior Member
Find
396
08-21-2018, 09:33 PM
#4
It seems the post appears to be written in a way that suggests only speed adjustments were made, not the actual implementation of DOCP or XMP for voltage or timing changes.
Reply
Reply
M
MettaloCaft
08-21-2018, 09:33 PM #4

It seems the post appears to be written in a way that suggests only speed adjustments were made, not the actual implementation of DOCP or XMP for voltage or timing changes.

Reply
Reply
Z
zSumerPvP_
Junior Member
Find
2
08-22-2018, 02:24 AM
#5
This is the initial action to take.
Reply
Reply
Z
zSumerPvP_
08-22-2018, 02:24 AM #5

This is the initial action to take.

Reply
Reply
O
Okeinshield
Senior Member
Find
595
08-22-2018, 05:51 AM
#6
I attempted this as well. When I chose DOCP Standard, it automatically adjusted the frequency to 3000, causing the boot issue you mentioned. Applying DOCP Standard with auto-frequency also led to a failed start-up.
Reply
Reply
O
Okeinshield
08-22-2018, 05:51 AM #6

I attempted this as well. When I chose DOCP Standard, it automatically adjusted the frequency to 3000, causing the boot issue you mentioned. Applying DOCP Standard with auto-frequency also led to a failed start-up.

Reply
Reply