Problem with PC startup after ARGB setup.
Problem with PC startup after ARGB setup.
This setup feels really confusing. On my previous version, I just hooked up the controller and set up the fans—everything functioned perfectly. Now this one is completely off track.
It seems the power management configuration for RGB isn't quite correct.
I mean it clearly. Could you provide more details about what you're asking?
It seems the controller works when just connected, but adding a fan causes issues. The CPU LED stays bright red while the PC boots normally. Connecting just one fan triggers the debug light between CPU and DRAM LED, but the system fails to start. Fans are spinning without resolving the problem.
Sure, I can adjust the colors and everything seems to be functioning properly. The cables appear intact with no signs of damage. I've placed an order for a replacement PSU today to see if it resolves the issue. It should arrive tomorrow, and I'll update you once I know the result.
Update quick on the new PSU – everything functions properly now. The CPU LED no longer flashes brightly when the PC is off, and it boots correctly as expected. It seems the new RAM might have pushed the PSU's limits, but the issue is resolved. Thanks for your help!