F5F Stay Refreshed Hardware Desktop Problem with PC not showing.

Problem with PC not showing.

Problem with PC not showing.

K
Kytzis
Member
183
02-21-2022, 01:30 PM
#1
I received a Sonny 48in A9s TV, but when I connected it to my PC it didn’t show any signal. It works with other devices like the PS5 Switch Pro and Xbox Series X. I’ve replaced every 3090 Ti in the house and there’s no difference. I’m not a miner and have a home LAN setup with 20 seats.
K
Kytzis
02-21-2022, 01:30 PM #1

I received a Sonny 48in A9s TV, but when I connected it to my PC it didn’t show any signal. It works with other devices like the PS5 Switch Pro and Xbox Series X. I’ve replaced every 3090 Ti in the house and there’s no difference. I’m not a miner and have a home LAN setup with 20 seats.

_
_broteeshka_
Junior Member
41
02-26-2022, 02:25 AM
#2
I’m using a certified cable for HDMI 2.1 with a total phase cable tester v2.
_
_broteeshka_
02-26-2022, 02:25 AM #2

I’m using a certified cable for HDMI 2.1 with a total phase cable tester v2.

W
wiw
Member
223
02-26-2022, 11:13 AM
#3
They referenced a past issue where turning on a compatibility setting in BIOS resolved it, likely related to older devices.
W
wiw
02-26-2022, 11:13 AM #3

They referenced a past issue where turning on a compatibility setting in BIOS resolved it, likely related to older devices.

B
Bloemkool33
Member
223
02-26-2022, 07:15 PM
#4
I couldn't locate any settings related to your bios feature.
B
Bloemkool33
02-26-2022, 07:15 PM #4

I couldn't locate any settings related to your bios feature.

C
Caydoyo
Member
73
03-01-2022, 03:03 PM
#5
I recently encountered a situation similar to one mentioned earlier, but it had been overlooked. It seems my board isn’t compatible with the full amount of RAM I have installed at its maximum capacity and performance level. I’m using a Crucial Ballistix CL16 DDR4-3200, and according to the Asus website, the board supports 16GB at that speed, not 32GB. To enable 32GB, I had to turn off DOCP/XMP settings. After making those changes, I’ve completed twelve consecutive starts, shutdowns, and restarts without any issues. You may want to consider this as a potential solution.
C
Caydoyo
03-01-2022, 03:03 PM #5

I recently encountered a situation similar to one mentioned earlier, but it had been overlooked. It seems my board isn’t compatible with the full amount of RAM I have installed at its maximum capacity and performance level. I’m using a Crucial Ballistix CL16 DDR4-3200, and according to the Asus website, the board supports 16GB at that speed, not 32GB. To enable 32GB, I had to turn off DOCP/XMP settings. After making those changes, I’ve completed twelve consecutive starts, shutdowns, and restarts without any issues. You may want to consider this as a potential solution.