Problem with MSI PRO B760-P Wi-Fi DDR4 board failing to power on.
Problem with MSI PRO B760-P Wi-Fi DDR4 board failing to power on.
Hi, i just bought a new MSI PRO B760-P WIFI DDR4 motherboard and an i3 13100f. The motherboard isn't powering up, i only used the CPU 1 power socket since max power draw for the 13100f is only 90 watts. I noticed there are no polarity symbols on the front panel power lead but i tried it both ways anyway and no joy. RAM is seated correctly in A2 and B2 slots. The 24-Pin ATX power is seated correctly. Any ideas greatly appreciated Thanks, Gary.
Did you connect the front panel connectors properly? Consider giving the CPU extra power using another connector. Verify that your display cable isn’t plugged into the motherboard’s display output. Vid on the front panel connectors below. Ensure they’re connected to your jftp1 port and confirm the PSU is active.
Confirm the PSU is connected properly, also consider reseating the CPU despite any discomfort. Connect your display cable to the GPU. Ensure all power connectors are seated correctly and verify each one. Make sure everything is installed as requested.
Turned on PSU, verified CPU placement, tried with display connected. Double-checked all power cables. No such issue has arisen before—I’ve only experienced a single dead motherboard since building my first PC in 1995, so this might be the second one.
Occasionally it happens. I'm sorry about that. Where did you purchase this motherboard? Refurbished, second-hand, or from a site like Facebook or Amazon?
Check the GPU model and verify its compatibility with the system.