Problem with internet access using powerline adapters
Problem with internet access using powerline adapters
These powerline adapters aren't particularly effective. Their performance seems inconsistent unless there have been recent updates since my last check. I've personally tested them and others did too, but none achieved satisfactory results. Problems like high latency, slow speeds when activating fans or lights on the same circuit, and overall unreliability led us to believe they're not a strong choice. They do provide internet access, but it doesn't perform well. Running a dedicated wire would be necessary to achieve the speeds you'd expect with gigabit internet.
Based on what I understand, the performance of powerline Ethernet adapters relies a lot on your home's wiring, which can greatly affect how well they work—or not at all. As shown in the video, you shouldn't anticipate speeds higher than 100-200 megabits per second.
Connection works well for calls, browsing the web, and gaming. The goal is to stream from one room to another via Steamlink (or Nvidia Shield, whichever performs better) using a LAN connection so everyone can watch on a big screen while the setup stays in the office. Edited April 17, 2020 by PMehlmann Wrong reply
Thanks for the clarification! You’d need roughly 20 meters of wire, about 25 if you want better cable organization, and you’ll have to drill through a solid 15 cm concrete wall. Since it’s not your home, you might want to skip this step and discuss alternatives with the landlord instead.
Can you guide the cable around the wall? I’m currently renting and run my Ethernet along the baseboards. It’s not super tidy, but it performs well. Depending on your local Wi-Fi strength, Wi-Fi might be preferable to powerline adapters, though running a wire is always ideal. I’ve usually managed to do it myself.
It seems this request isn't clear. Could you please rephrase or provide more details? I'm here to help!
To wrap up the discussion: I changed the configuration, the PC returned to the area where the LAN cable is available and now has full Ethernet speed. Steamlink is running in the meeting room and I’m using it for work tasks. So far everything works well, though there are a few mouse problems but they’re manageable. Thanks everyone for your assistance and advice!