F5F Stay Refreshed Hardware Desktop Problem with installing Windows 11 on new PC

Problem with installing Windows 11 on new PC

Problem with installing Windows 11 on new PC

G
Gingeepie
Junior Member
42
08-27-2023, 03:58 PM
#1
New build is not allowing me to install Windows 11 Home. It is telling me that my system does not meet the requirements. However this is the computer setup: CPU: Ryzen 7 7800X3D 8Core SSD: Samsung 990 Pro NVMe M.2 4Tb 64 GB DDR5 Ram 5600MHz GPU: RX 7900XTX Motherboard: B650E-F wifi with an additional 4Tb HDD All Ram and drives are posting in Bios and I have updated the bios as well. Any help on this would be greatly appreciated.
G
Gingeepie
08-27-2023, 03:58 PM #1

New build is not allowing me to install Windows 11 Home. It is telling me that my system does not meet the requirements. However this is the computer setup: CPU: Ryzen 7 7800X3D 8Core SSD: Samsung 990 Pro NVMe M.2 4Tb 64 GB DDR5 Ram 5600MHz GPU: RX 7900XTX Motherboard: B650E-F wifi with an additional 4Tb HDD All Ram and drives are posting in Bios and I have updated the bios as well. Any help on this would be greatly appreciated.

D
Death_GD
Junior Member
38
08-29-2023, 04:31 PM
#2
During Windows 11 setup, press Shift+F10 to open the command prompt. Type "regedit" and press Enter. Go to HKEY_LOCAL_MACHINE\SYSTEM\Setup and create a new key named LabConfig. Inside that key, add two DWORD values of 32 bits each—label them 'BypassTPMCheck' and 'BypassSecureBootCheck'—and set their values to 1. Close regedit and the command prompt, and Windows will proceed as usual.
D
Death_GD
08-29-2023, 04:31 PM #2

During Windows 11 setup, press Shift+F10 to open the command prompt. Type "regedit" and press Enter. Go to HKEY_LOCAL_MACHINE\SYSTEM\Setup and create a new key named LabConfig. Inside that key, add two DWORD values of 32 bits each—label them 'BypassTPMCheck' and 'BypassSecureBootCheck'—and set their values to 1. Close regedit and the command prompt, and Windows will proceed as usual.

L
LordPancake_
Junior Member
5
09-02-2023, 04:07 PM
#3
Ensure TPM 2.0 and Secure Boot are activated in your BIOS settings. If issues persist despite this, check your latest update.
L
LordPancake_
09-02-2023, 04:07 PM #3

Ensure TPM 2.0 and Secure Boot are activated in your BIOS settings. If issues persist despite this, check your latest update.

I
162
09-12-2023, 06:37 AM
#4
Ensure Windows 11 is set up on the SSD, not the HDD
I
iTz_x_Joesephs
09-12-2023, 06:37 AM #4

Ensure Windows 11 is set up on the SSD, not the HDD

T
Twieeh
Member
50
09-15-2023, 06:26 AM
#5
This likely indicates a missing component, possibly a disk controller driver during installation. ... Ofcourse unless the disk is MBR formatted.
T
Twieeh
09-15-2023, 06:26 AM #5

This likely indicates a missing component, possibly a disk controller driver during installation. ... Ofcourse unless the disk is MBR formatted.