F5F Stay Refreshed Hardware Desktop Problem with cooling system

Problem with cooling system

Problem with cooling system

L
legoninja365
Member
59
11-28-2016, 04:36 AM
#1
I recently assembled a new PC and everything functioned properly except for occasional slow startup. Around 75% of the time when I power it on, I experience temperatures reaching 96°C. My AIO shows 0RPM, yet fans are clearly spinning. I looked into typical problems and tried updating the BIOS, following the most common advice. After that, no improvements were noticed. I’ve attached photos of the PC and screenshots of the fan speeds for your reference. Any guidance would be greatly appreciated!
L
legoninja365
11-28-2016, 04:36 AM #1

I recently assembled a new PC and everything functioned properly except for occasional slow startup. Around 75% of the time when I power it on, I experience temperatures reaching 96°C. My AIO shows 0RPM, yet fans are clearly spinning. I looked into typical problems and tried updating the BIOS, following the most common advice. After that, no improvements were noticed. I’ve attached photos of the PC and screenshots of the fan speeds for your reference. Any guidance would be greatly appreciated!

D
DivinFighter
Member
53
12-02-2016, 12:54 PM
#2
Is the pump operating? The fans may run, but they'll appear differently from the pump. It seems it should be active, though overheating at 96°C might cause it to slow or shut down. You're connecting it to the CPU_FAN header, are you sure?
D
DivinFighter
12-02-2016, 12:54 PM #2

Is the pump operating? The fans may run, but they'll appear differently from the pump. It seems it should be active, though overheating at 96°C might cause it to slow or shut down. You're connecting it to the CPU_FAN header, are you sure?

M
miner3378
Member
248
12-02-2016, 06:09 PM
#3
You can check if the pump is active by observing its power supply or listening for any noise from the motor. If it’s receiving power and running, you should see corresponding signals or sounds.
M
miner3378
12-02-2016, 06:09 PM #3

You can check if the pump is active by observing its power supply or listening for any noise from the motor. If it’s receiving power and running, you should see corresponding signals or sounds.

M
MavrosGR
Senior Member
579
12-03-2016, 12:46 AM
#4
The pump casing needs to vibrate, or you should be able to hear the motor running when you place your ear close by.
M
MavrosGR
12-03-2016, 12:46 AM #4

The pump casing needs to vibrate, or you should be able to hear the motor running when you place your ear close by.