Problem persists following the BIOS update.

Pages (2): 1 2 Next

BlueTaco92
Junior Member

12-09-2017, 01:12 AM

I have a Ryzen 3 2200G processor, a Gigabyte A320M-D2 motherboard, 2400MHz RAM, and no GPU. The computer would shut down unexpectedly. I checked the system logs and noticed a current distribution issue. I tried updating the BIOS using Gigabyte App Center, moving from F22B to F31B and asking to restart. After restarting, the system turned on but didn’t power off properly, leaving it on for some time without a display. I’m looking for advice soon. Thank you.

BlueTaco92

12-09-2017, 01:12 AM #1

yalex27
Senior Member

461

12-09-2017, 02:24 AM

Many users face issues when their BIOS becomes corrupted after an in-OS update. For better stability, it's recommended to save the BIOS update to a USB drive and install it via the BIOS interface, rather than using Windows.

yalex27

12-09-2017, 02:24 AM #2

Bella0810
Member

129

12-15-2017, 02:52 PM

They instructed to restart the PC, which caused it to fail to display anything and displayed no signal on the monitor.

Bella0810

12-15-2017, 02:52 PM #3

They instructed to restart the PC, which caused it to fail to display anything and displayed no signal on the monitor.

VidarOK
Junior Member

12-17-2017, 03:39 PM

Delete CMOS settings

VidarOK

12-17-2017, 03:39 PM #4

Delete CMOS settings

stockchief7
Member

172

12-19-2017, 10:04 AM

Yes, there is a method to restore the original bios.

stockchief7

12-19-2017, 10:04 AM #5

Yes, there is a method to restore the original bios.

spy_321
Member

12-19-2017, 03:52 PM

I checked the CMOS but there was no improvement.

spy_321

12-19-2017, 03:52 PM #6

I checked the CMOS but there was no improvement.

RHINOncg2000
Member

162

12-19-2017, 07:09 PM

It seems there may be an issue with your profile information. You'll need to initiate a return or replacement process.

RHINOncg2000

12-19-2017, 07:09 PM #7

It seems there may be an issue with your profile information. You'll need to initiate a return or replacement process.

InoueAlice
Senior Member

677

12-19-2017, 08:13 PM

Any other way

InoueAlice

12-19-2017, 08:13 PM #8

Any other way

emstay26
Senior Member

441

01-10-2018, 04:40 AM

I don't suggest using BIOS/EPROM USB programmer.

emstay26

01-10-2018, 04:40 AM #9

I don't suggest using BIOS/EPROM USB programmer.

CenationRko
Junior Member

01-11-2018, 05:46 PM

#10

I didn't interact with it while the BIOS was updating. It indicated a flashing of 100% and prompted to restart the computer, which I did, resulting in no display now.

CenationRko

01-11-2018, 05:46 PM #10

I didn't interact with it while the BIOS was updating. It indicated a flashing of 100% and prompted to restart the computer, which I did, resulting in no display now.

Pages (2): 1 2 Next