F5F Stay Refreshed Hardware Desktop Problem experiencing difficulties installing fresh Windows 11, along with SSD-related issues.

Problem experiencing difficulties installing fresh Windows 11, along with SSD-related issues.

Problem experiencing difficulties installing fresh Windows 11, along with SSD-related issues.

D
depu
Junior Member
4
03-13-2021, 07:41 AM
#1
Hi everyone, I recently set up a PC a few weeks back and everything worked smoothly until now. I’m stuck because I can’t access Windows anymore, so I thought about reinstalling Windows 11. I have a Samsung SSD 9100 pro 2 TB installed on an Aorus Pro Ice X3D board. The GPU is a Gigabyte Aero 5070 Ti and the RAM is Klevv DDR 32 GB. My BIOS sometimes recognizes the SSD, other times it doesn’t. When I plug in the Windows USB for a fresh install, the drive shows up sometimes and other times not. If it does show up, I can’t delete any partitions, and it seems like you’d want to do that before installing on unused space. I’ve tried almost everything—clearing CMOS, disabling secure boot, re-seating the SSD, reinstalling RAM, making sure ACHIEVE was enabled. I’m really at a loss here.
D
depu
03-13-2021, 07:41 AM #1

Hi everyone, I recently set up a PC a few weeks back and everything worked smoothly until now. I’m stuck because I can’t access Windows anymore, so I thought about reinstalling Windows 11. I have a Samsung SSD 9100 pro 2 TB installed on an Aorus Pro Ice X3D board. The GPU is a Gigabyte Aero 5070 Ti and the RAM is Klevv DDR 32 GB. My BIOS sometimes recognizes the SSD, other times it doesn’t. When I plug in the Windows USB for a fresh install, the drive shows up sometimes and other times not. If it does show up, I can’t delete any partitions, and it seems like you’d want to do that before installing on unused space. I’ve tried almost everything—clearing CMOS, disabling secure boot, re-seating the SSD, reinstalling RAM, making sure ACHIEVE was enabled. I’m really at a loss here.

V
Vinceb11
Member
234
03-20-2021, 06:56 PM
#2
Welcome to the forums, newcomer! Your bios occasionally detects the SSD. What is the BIOS version for your motherboard right now? Which slot is the SSD being installed in? Are you using additional storage devices?
V
Vinceb11
03-20-2021, 06:56 PM #2

Welcome to the forums, newcomer! Your bios occasionally detects the SSD. What is the BIOS version for your motherboard right now? Which slot is the SSD being installed in? Are you using additional storage devices?

P
PurplePandaMC
Member
87
03-28-2021, 11:57 AM
#3
Have you checked for the latest firmware updates? It might help to address PCIE 5 instability, as updating the BIOS could resolve your problem similar to what worked for the Reddit user. Consider switching the PCIe generation from auto to 5 (or changing gen 4 to troubleshoot and verify SSD detection reliability) in the BIOS settings.
P
PurplePandaMC
03-28-2021, 11:57 AM #3

Have you checked for the latest firmware updates? It might help to address PCIE 5 instability, as updating the BIOS could resolve your problem similar to what worked for the Reddit user. Consider switching the PCIe generation from auto to 5 (or changing gen 4 to troubleshoot and verify SSD detection reliability) in the BIOS settings.

T
tapper324
Junior Member
24
03-29-2021, 05:47 AM
#4
I'm using F2 for the pro ice x3d, which has been functioning well until now. The SSD is placed right above the GPU slot. I previously removed another storage SSD to see if that would help this one work.

When I open the Windows installer, should I remove the existing partitions and leave the unallocated space for installation? The software doesn't allow actual partition deletion. For Gen 5, I think I should use the PCIe X4 slot option, but all my slots are the same and I plan to add a second Gen 4 later. Is this going to cause any problems?

Also, since I don’t have another PC, updating the BIOS seems out of reach at the moment.

Cooling the processor with a hydro shift 2 worked fine when the PC was running; temperatures reached 70°C during games and rose to 45-50°C when idle.
T
tapper324
03-29-2021, 05:47 AM #4

I'm using F2 for the pro ice x3d, which has been functioning well until now. The SSD is placed right above the GPU slot. I previously removed another storage SSD to see if that would help this one work.

When I open the Windows installer, should I remove the existing partitions and leave the unallocated space for installation? The software doesn't allow actual partition deletion. For Gen 5, I think I should use the PCIe X4 slot option, but all my slots are the same and I plan to add a second Gen 4 later. Is this going to cause any problems?

Also, since I don’t have another PC, updating the BIOS seems out of reach at the moment.

Cooling the processor with a hydro shift 2 worked fine when the PC was running; temperatures reached 70°C during games and rose to 45-50°C when idle.

P
Paulinchi21
Junior Member
33
04-01-2021, 06:00 AM
#5
It seems you haven't removed partitions yet, which is good. Consider switching the PCIe slot to Gen 4 and check if Windows boots. If successful, proceed with updating the BIOS.
P
Paulinchi21
04-01-2021, 06:00 AM #5

It seems you haven't removed partitions yet, which is good. Consider switching the PCIe slot to Gen 4 and check if Windows boots. If successful, proceed with updating the BIOS.

A
Abdo_
Junior Member
1
04-02-2021, 02:37 PM
#6
I processed the disk with diskpart. Yet partitions remain visible even though the Windows installer detects them.
A
Abdo_
04-02-2021, 02:37 PM #6

I processed the disk with diskpart. Yet partitions remain visible even though the Windows installer detects them.

X
XxgamerxX1677
Member
214
04-04-2021, 08:10 PM
#7
Hopefully setting PCIE to gen 4 assists with this. See here for more details. How To - Windows 11 clean install tutorial This guide aims to walk you through a clean installation of Windows 11, version 23H2 or later, and it can also be used for earlier versions with minor visual differences but mostly similar overall... forums.
X
XxgamerxX1677
04-04-2021, 08:10 PM #7

Hopefully setting PCIE to gen 4 assists with this. See here for more details. How To - Windows 11 clean install tutorial This guide aims to walk you through a clean installation of Windows 11, version 23H2 or later, and it can also be used for earlier versions with minor visual differences but mostly similar overall... forums.

K
KiLAD_
Junior Member
8
04-06-2021, 03:22 PM
#8
I checked the bios to see if the windows installer would open with the SSD installed and loaded. Diskpart displayed the SSD during disk listing. During installation, I encountered an error code 0x8004240b while searching for disks.
K
KiLAD_
04-06-2021, 03:22 PM #8

I checked the bios to see if the windows installer would open with the SSD installed and loaded. Diskpart displayed the SSD during disk listing. During installation, I encountered an error code 0x8004240b while searching for disks.