F5F Stay Refreshed Hardware Desktop Problem encountered with the device not sending a message.

Problem encountered with the device not sending a message.

Problem encountered with the device not sending a message.

S
Sekiel
Member
56
03-27-2022, 11:23 AM
#1
A new Ryzen 9 7900X build is functioning perfectly. I returned home last night only to find it unresponsive—rebooting didn’t help, just the power light stayed on. It seems everything is working fine except the RGB lighting isn’t displaying anymore. No issues with the DDR5 DRAM at 6000MHz or any other settings. Please assist.
S
Sekiel
03-27-2022, 11:23 AM #1

A new Ryzen 9 7900X build is functioning perfectly. I returned home last night only to find it unresponsive—rebooting didn’t help, just the power light stayed on. It seems everything is working fine except the RGB lighting isn’t displaying anymore. No issues with the DDR5 DRAM at 6000MHz or any other settings. Please assist.

B
blackwolf1778
Junior Member
40
04-01-2022, 03:27 AM
#2
Shut off the power source. Place the memory in slot A2. Take out the CMOS battery from the motherboard and let it sit for five minutes. While doing so, press the power button for thirty seconds. Put the CMOS battery back onto the board. Reconnect the power and turn on the system. Try accessing the BIOS.
B
blackwolf1778
04-01-2022, 03:27 AM #2

Shut off the power source. Place the memory in slot A2. Take out the CMOS battery from the motherboard and let it sit for five minutes. While doing so, press the power button for thirty seconds. Put the CMOS battery back onto the board. Reconnect the power and turn on the system. Try accessing the BIOS.

B
BHLxNJx
Posting Freak
881
04-01-2022, 04:14 AM
#3
If you insert one stick into slot A, the CPU debug light activates. Adding another stick triggers the DRAM light. It worked smoothly for the past two weeks until last night when everything changed.
B
BHLxNJx
04-01-2022, 04:14 AM #3

If you insert one stick into slot A, the CPU debug light activates. Adding another stick triggers the DRAM light. It worked smoothly for the past two weeks until last night when everything changed.

O
OmqDace
Posting Freak
798
04-01-2022, 05:30 AM
#4
There seems to be an issue with the CPU. Is there another one ready for testing?
O
OmqDace
04-01-2022, 05:30 AM #4

There seems to be an issue with the CPU. Is there another one ready for testing?

F
Freakiiianyx3
Senior Member
694
04-05-2022, 08:43 AM
#5
I actually received this 7900X recently, along with a brand-new motherboard about two weeks prior.
F
Freakiiianyx3
04-05-2022, 08:43 AM #5

I actually received this 7900X recently, along with a brand-new motherboard about two weeks prior.

I
isaiasglz
Junior Member
13
04-05-2022, 09:10 AM
#6
Everything was functioning smoothly until I left, returned, and noticed the screens were empty with only the debug lights appearing. After replacing the CPU and RAM, the issue persists.
I
isaiasglz
04-05-2022, 09:10 AM #6

Everything was functioning smoothly until I left, returned, and noticed the screens were empty with only the debug lights appearing. After replacing the CPU and RAM, the issue persists.

J
JOCKER1709
Member
66
04-05-2022, 03:24 PM
#7
It seems you experienced a power surge and now a part is malfunctioning. The safest option is to bring it to a repair shop for detailed inspection.
J
JOCKER1709
04-05-2022, 03:24 PM #7

It seems you experienced a power surge and now a part is malfunctioning. The safest option is to bring it to a repair shop for detailed inspection.

S
Sheikrik
Senior Member
441
04-05-2022, 06:22 PM
#8
This situation is really annoying—it was functioning perfectly before. When I arrived at work, it stopped working immediately, and now the DRM debug indicator is active. After inserting a single stick, the CPU debug light turned on. Once both sticks are back in place, the DRAM debug light appears again. Additionally, only the CPU block's RGB isn't responding.
S
Sheikrik
04-05-2022, 06:22 PM #8

This situation is really annoying—it was functioning perfectly before. When I arrived at work, it stopped working immediately, and now the DRM debug indicator is active. After inserting a single stick, the CPU debug light turned on. Once both sticks are back in place, the DRAM debug light appears again. Additionally, only the CPU block's RGB isn't responding.