Powerline (DLAN) latency penalty
Powerline (DLAN) latency penalty
Hey, I don’t have a clear idea about the impact on latency or the exact bandwidth limits with powerline adapters. It’s usually less reliable than Ethernet, so you might see higher latency and lower speeds. For bandwidth, powerline can handle a few megabits per second, but it’s not as consistent as a wired connection. Let me know if you need more details!
During my experience, latency fluctuated significantly, making it impossible to stream Steam at home. The highest speeds I recorded were around 200Mbps. Powerline was a solution from ten years ago. The improved option now is Wi-Fi (or mesh Wi-Fi if the distances are sufficient).
That's what I expected. I've heard many negative stories about it, yet I've never worked with it before. Thanks.
Have you considered getting more perspectives before suggesting something to your friend?
He might consider MoCA adapters when there is an existing coaxial cable in place.
Wifi 6 offers strong performance at distances above 5+ GHz and better wall penetration than older standards. It’s ideal for low-latency applications like streaming, though its range is shorter compared to the more interference-prone 2.4 GHz band. Based on current knowledge, Wi-Fi APs typically max out around 60-80 feet in 5 GHz, with significant signal loss through standard walls. My experience with Wi-Fi 5 shows reception dropping below 40 feet past a wall. If placement is limited, mesh networking combined with a backhaul could be a viable alternative.