F5F Stay Refreshed Hardware Desktop Power constraint of the CPU

Power constraint of the CPU

Power constraint of the CPU

Pages (2): 1 2 Next
K
killerbhai21
Junior Member
35
02-22-2018, 05:24 AM
#1
I recently acquired an old i7 2600 and am running it with the built-in cooler. I set the energy limit to 70% in Windows settings, which caps the clock speed at about 2.2GHz and keeps temperatures near 80°C under full load. However, in certain games like Valorant and Sw Battlefront 2 from Epic, the CPU throttles to 3.4GHz and reaches 90°C. What can I do about this? It only happens in those specific titles.
K
killerbhai21
02-22-2018, 05:24 AM #1

I recently acquired an old i7 2600 and am running it with the built-in cooler. I set the energy limit to 70% in Windows settings, which caps the clock speed at about 2.2GHz and keeps temperatures near 80°C under full load. However, in certain games like Valorant and Sw Battlefront 2 from Epic, the CPU throttles to 3.4GHz and reaches 90°C. What can I do about this? It only happens in those specific titles.

L
LukeZz
Junior Member
27
03-02-2018, 09:25 AM
#2
Did you clear the debris from the cooler? Also, make sure to wipe it down and reapply fresh thermal paste if everything was previously assembled hastily.
L
LukeZz
03-02-2018, 09:25 AM #2

Did you clear the debris from the cooler? Also, make sure to wipe it down and reapply fresh thermal paste if everything was previously assembled hastily.

B
barkris123
Member
73
03-02-2018, 11:14 AM
#3
I kept the cooler in a board inside an anti-static bag to avoid dirt. Only the fan blades were cleaned; I replaced the thermal paste, though I’m unsure what kind of Chinese product it was. It performed okay with the Athlon II, but that model had a better heatsink and used less power.
B
barkris123
03-02-2018, 11:14 AM #3

I kept the cooler in a board inside an anti-static bag to avoid dirt. Only the fan blades were cleaned; I replaced the thermal paste, though I’m unsure what kind of Chinese product it was. It performed okay with the Athlon II, but that model had a better heatsink and used less power.

K
KatLeCat
Junior Member
23
03-03-2018, 04:12 PM
#4
You might also try Intel XTU or Throttlestop to lower the CPU voltage. This could reduce temperatures significantly.
K
KatLeCat
03-03-2018, 04:12 PM #4

You might also try Intel XTU or Throttlestop to lower the CPU voltage. This could reduce temperatures significantly.

R
Rektofn
Junior Member
20
03-03-2018, 08:26 PM
#5
They aren't available on the sandy bridge, and the bios don't offer any choices either.
R
Rektofn
03-03-2018, 08:26 PM #5

They aren't available on the sandy bridge, and the bios don't offer any choices either.

T
tsunamifult
Junior Member
12
03-03-2018, 09:34 PM
#6
What kind of motherboard? Maybe share some images of the BIOS I think the standard one is. The default voltage seems too low for such a slow 3.4GHz, so consider upgrading the CPU via jump pads on the CPU side using conductive ink or aluminum tape. Check page 73 and 74 for key details—the original voltage is 1.25V, which is quite low for this performance. I suggest locking all cores to max allcore turbo (3.5GHz) with throttling stop, and modify the BIOS video to 1.125V or 1.05V. Set a video pad to 0 to jump to a VSS (ground) pad, and set another pad to 1 to jump to a VCC pad.
T
tsunamifult
03-03-2018, 09:34 PM #6

What kind of motherboard? Maybe share some images of the BIOS I think the standard one is. The default voltage seems too low for such a slow 3.4GHz, so consider upgrading the CPU via jump pads on the CPU side using conductive ink or aluminum tape. Check page 73 and 74 for key details—the original voltage is 1.25V, which is quite low for this performance. I suggest locking all cores to max allcore turbo (3.5GHz) with throttling stop, and modify the BIOS video to 1.125V or 1.05V. Set a video pad to 0 to jump to a VSS (ground) pad, and set another pad to 1 to jump to a VCC pad.

V
Vren
Member
117
03-14-2018, 08:59 AM
#7
It's a Foxconn H61MXE model. The BIOS lists CPU options, and I've turned off Turbo Boost.
V
Vren
03-14-2018, 08:59 AM #7

It's a Foxconn H61MXE model. The BIOS lists CPU options, and I've turned off Turbo Boost.

I
iNaseer502
Member
152
03-14-2018, 10:04 PM
#8
Purchase the ch341a and update the BIOS to a foxconn z68a-s to determine its effectiveness
I
iNaseer502
03-14-2018, 10:04 PM #8

Purchase the ch341a and update the BIOS to a foxconn z68a-s to determine its effectiveness

S
SA_minecraft
Member
203
03-15-2018, 06:08 AM
#9
ThrottleStop works with Sandy Bridge. Share any images if you require assistance.
S
SA_minecraft
03-15-2018, 06:08 AM #9

ThrottleStop works with Sandy Bridge. Share any images if you require assistance.

M
Mazemace
Junior Member
36
03-17-2018, 01:56 AM
#10
It offers but not the five-figure option, preventing undervolting via that feature. You can adjust the turbo time and power caps instead. I was looking for an older XTU model that could work, but the only compatible one lacked a voltage setting as well.
M
Mazemace
03-17-2018, 01:56 AM #10

It offers but not the five-figure option, preventing undervolting via that feature. You can adjust the turbo time and power caps instead. I was looking for an older XTU model that could work, but the only compatible one lacked a voltage setting as well.

Pages (2): 1 2 Next