F5F Stay Refreshed Hardware Desktop Performance spike detected in CPU usage.

Performance spike detected in CPU usage.

Performance spike detected in CPU usage.

Pages (2): Previous 1 2
X
Xyphosteams
Junior Member
9
02-27-2018, 03:32 PM
#11
Search for the device's specifications, verify the CPU cooler space requirements, and confirm the precise height of the cooler you plan to purchase.
X
Xyphosteams
02-27-2018, 03:32 PM #11

Search for the device's specifications, verify the CPU cooler space requirements, and confirm the precise height of the cooler you plan to purchase.

D
dfasdj6645
Member
55
02-27-2018, 04:57 PM
#12
Humorously, in the recent tech support challenge LMT did, Jay neglected to realize there was no thermal paste, and yet still managed to overclock and beat the benchmark scores. It was running hotter than the fires of hades, but the CPU will still work, at least until it melts. There's your problem. The fit must be tight. A CPU is built to withstand 50 lbs of pressure specifically so the cooler fit can be very tight. The whole point of thermal paste is that even microscopic grooves in the IHS or cooler heatsink can be enough to severely diminish the transfer of heat: the thermal paste serves to fill in these microscopic grooves. If the cooler is just hanging loose, then yeah, your temps are going to be bad.
D
dfasdj6645
02-27-2018, 04:57 PM #12

Humorously, in the recent tech support challenge LMT did, Jay neglected to realize there was no thermal paste, and yet still managed to overclock and beat the benchmark scores. It was running hotter than the fires of hades, but the CPU will still work, at least until it melts. There's your problem. The fit must be tight. A CPU is built to withstand 50 lbs of pressure specifically so the cooler fit can be very tight. The whole point of thermal paste is that even microscopic grooves in the IHS or cooler heatsink can be enough to severely diminish the transfer of heat: the thermal paste serves to fill in these microscopic grooves. If the cooler is just hanging loose, then yeah, your temps are going to be bad.

R
RoseQ
Member
161
03-04-2018, 11:27 PM
#13
Absolutely, I noticed that too! It was really impressive how Jay achieved the benchmark. I'm happy everyone sees it as the Cooler, not the PSU, and my wallet is holding up just fine right now.
R
RoseQ
03-04-2018, 11:27 PM #13

Absolutely, I noticed that too! It was really impressive how Jay achieved the benchmark. I'm happy everyone sees it as the Cooler, not the PSU, and my wallet is holding up just fine right now.

S
Sozomr
Junior Member
8
03-06-2018, 01:49 AM
#14
The piece is 170mm, but the thic boys are all 165mm with the exception of the A500 at 170mm. This means it should fit without scraping the glass.
S
Sozomr
03-06-2018, 01:49 AM #14

The piece is 170mm, but the thic boys are all 165mm with the exception of the A500 at 170mm. This means it should fit without scraping the glass.

M
ManuPeter_08
Junior Member
14
03-06-2018, 07:09 AM
#15
might fit, depending if the case manufacturer actually leaves some leeway in the number iirc you can remove the top plate off the A500 to lower its height(?) honestly if your cooler have been causing issues, why did you not RMA it while it was still new? i recommend you look into mounting it properly before spending money, unless something is broken then that cant be helped
M
ManuPeter_08
03-06-2018, 07:09 AM #15

might fit, depending if the case manufacturer actually leaves some leeway in the number iirc you can remove the top plate off the A500 to lower its height(?) honestly if your cooler have been causing issues, why did you not RMA it while it was still new? i recommend you look into mounting it properly before spending money, unless something is broken then that cant be helped

S
SoulzReaped
Member
217
03-24-2018, 10:54 AM
#16
I hope we don't have such benefits or guarantees here (I live in Iraq) and I just managed to get by. It worked fine for years, probably handled two CPUs well. Maybe it's so old it can't conduct heat anymore—just like I mentioned, it never fully sits on the CPU, which was frustrating until recently. About two days ago I moved it again, but I thought maybe something else could cause the crash. Since everyone here is confident it’s just the cooler, I feel a bit better now. I’ll find out soon enough, I guess.
S
SoulzReaped
03-24-2018, 10:54 AM #16

I hope we don't have such benefits or guarantees here (I live in Iraq) and I just managed to get by. It worked fine for years, probably handled two CPUs well. Maybe it's so old it can't conduct heat anymore—just like I mentioned, it never fully sits on the CPU, which was frustrating until recently. About two days ago I moved it again, but I thought maybe something else could cause the crash. Since everyone here is confident it’s just the cooler, I feel a bit better now. I’ll find out soon enough, I guess.

M
Miyuumi
Senior Member
543
03-24-2018, 12:53 PM
#17
I recently purchased the Corsair A500. At high settings, the HZD is on, with the second temperature at the CPU setting around 50°C after 30 minutes of use. I recall Linus mentioning it’s loud, but I haven’t heard anything. The case is positioned just below me and there’s only a slight hum. Thanks for your assistance!
M
Miyuumi
03-24-2018, 12:53 PM #17

I recently purchased the Corsair A500. At high settings, the HZD is on, with the second temperature at the CPU setting around 50°C after 30 minutes of use. I recall Linus mentioning it’s loud, but I haven’t heard anything. The case is positioned just below me and there’s only a slight hum. Thanks for your assistance!

Pages (2): Previous 1 2