Performance remains high even when not in use.

149

03-16-2019, 03:15 PM

I just upgraded my CPU to the Ryzen 5 3600 and motherboard to the B450 Aorus M. I attached my old CPU cooler, the Be Quiet Pure Rock Slim. But when I powered everything on, the CPU kept increasing fan speed and stayed between 43 and 70 degrees Celsius. I updated the BIOS, installed all the motherboard drivers, and the latest AMD drivers, but it didn’t help. Here’s a screenshot of my system info when idle. If anyone has advice, please share. Thanks Smile

ItzUtopia_PvP

03-16-2019, 03:15 PM #1

Ruddyz
Junior Member

03-20-2019, 04:42 AM

Have you changed the thermal paste again? What are your operating temperatures? Static conditions aren't important.

Ruddyz

03-20-2019, 04:42 AM #2

Have you changed the thermal paste again? What are your operating temperatures? Static conditions aren't important.

EuropeanUnion
Senior Member

700

03-20-2019, 07:32 PM

It's a brand new thermal paste. After running Prime95 across all 12 cores, temperatures are reaching about 72 degrees at the highest.

EuropeanUnion

03-20-2019, 07:32 PM #3

It's a brand new thermal paste. After running Prime95 across all 12 cores, temperatures are reaching about 72 degrees at the highest.

Artur630
Member

168

04-04-2019, 01:28 AM

thats good

Artur630

04-04-2019, 01:28 AM #4

thats good

xXSuperNovaXx
Posting Freak

811

04-11-2019, 08:29 AM

Executing AID64 at 4000MHZ reaches a peak temperature of 90°C.

xXSuperNovaXx

04-11-2019, 08:29 AM #5

Executing AID64 at 4000MHZ reaches a peak temperature of 90°C.

Megaol_
Member

04-11-2019, 09:54 AM

I tried it for five minutes but had to pause it quickly because the CPU hit 90°C.

Megaol_

04-11-2019, 09:54 AM #6

I tried it for five minutes but had to pause it quickly because the CPU hit 90°C.

jellyman102
Junior Member

04-11-2019, 02:42 PM

It looks like the device is quite warm. Consider reapplying thermal paste and reattaching the cooler.

jellyman102

04-11-2019, 02:42 PM #7

It looks like the device is quite warm. Consider reapplying thermal paste and reattaching the cooler.

i0cean
Member

218

04-26-2019, 02:55 AM

I'm going to use the stock cooler. The mounting bracket doesn't seem ideal—it's more like a clamp.

i0cean

04-26-2019, 02:55 AM #8

I'm going to use the stock cooler. The mounting bracket doesn't seem ideal—it's more like a clamp.

Pr4y
Junior Member

04-26-2019, 03:50 PM

I disassembled everything, removed all the thermal paste. Put in the stock cooler. Restarted it and the temperatures are nearly identical to before. Really annoying.

Pr4y

04-26-2019, 03:50 PM #9

I disassembled everything, removed all the thermal paste. Put in the stock cooler. Restarted it and the temperatures are nearly identical to before. Really annoying.