Performance metrics at 3060 levels
Performance metrics at 3060 levels
Hello everyone, I recently got the chance to purchase a 3060 and did. I've been testing some games but noticed it's having trouble maintaining over 60fps and can drop to about 30fps. I've installed the latest drivers and switched my NVIDIA control panel to performance mode. My GPU and CPU sometimes reach 50% usage together at temperatures between 50-60°C, which I think is actually good. I'm not familiar with the terms bottlenecking or being 'bound,' but I believe my CPU and possibly RAM might need improvement. I'm adjusting resolution and quality in my games, but it doesn't seem to make much difference. GTA 4 consistently hits around 40fps, Cyberpunk only reaches 60 with DLSS and Star Wars Jedi: Fallen Order drops to 30. On average, every major game I've played is near 60 but never exceeds it. Am I not getting enough power from my GPU? I'd like to know if I can achieve 100fps and reduce those fps drops. I own this new card, but it doesn't feel like I'm getting any noticeable boost. Here are my specifications and user benchmark results: Graphics card: GeForce RTX 3060 VISION OC 12G CPU: AMD Ryzen 5 1600 CPU cooling: NZXT Kraken M22 RGB Motherboard: Gigabyte B450M DS3H - mATX Memory: Corsair Vengeance LPX Black 16GB DDR4 2133MHz Case: Fractal Design Focus G Mini PSU: Corsair PowerSupply CX750M 750W Harddrive: Seagate Barracuda 2TB SSD: Samsung 850 EVO 250GB Nvme M.2 SSD: Kingston A2000 500GB
It seems like a CPU limitation might be the issue, with some games requiring more processing power than others, which could account for performance differences.
It might actually be your CX750M power supply. Do you have the green certification? If yes, I recommend swapping it out, as it falls into Tier C. Your RTX 3060 might be drawing too much power or experiencing spikes that the PSU can't manage, which could be hurting performance. The Ryzen 5 1600 should work well with the 3060. Try borrowing a friend's higher-quality PSU to check if that's the issue.
I own the Corsair CXM V2 (2017), the latest model, so I feel confident. I assessed my PC's power draw at about 346W. That led me to think a new CPU might be needed. I've been considering a Ryzen 5 3600 with 16GB (two 8GB) DDR4 3200Mhz. Would this setup improve performance? Expect better frames per second and higher GPU utilization? I understand each application uses the GPU differently. Just to say, in an optimal scenario where the GPU is the primary driver, you'd aim for roughly 40% CPU and 80-90% GPU usage.
Your system speed is quite high at 2133! That creates a significant limitation for data transfer, and your CPU might also become a constraint on the GPU, especially given the RAM speed. The Ryzen processor gains more performance when paired with dual-channel memory, reaching speeds near 3200-3733, which matches the maximum supported by Infinity Fabric. RAM speed plays a crucial role in how quickly data moves between storage, RAM, the CPU, and the GPU. It’s essential. Each component in your setup acts like a link in a bicycle chain—whatever is the weakest point limits overall strength. Your RAM could be the limiting factor. The CPU can improve with better RAM, but it’s important to verify if your RAM is correctly set up in BIOS. You might need to adjust it using the “memory try it” feature. If your RAM indicates speeds like 3200/3600/3000, try lowering it to 2933 and run stability checks until it remains stable. Once instability appears, reduce the frequency again. Also, consider whether other applications—like Windows updates, mining software, or malware—are stressing your CPU or RAM resources.
I just looked at your userbenchmark data for Corsair Vengeance LPX DDR4 3000 C15. The average score is 82% with two of four slots using 16GB DDR4 at 2133 MHz. Performance is below the top 39%. Make sure the dual+ channel XMP BIOS profile is activated, then configure it correctly in BIOS and try your games again.
And regarding GPU performance, NVIDIA G-SYNC may limit benchmark frames per second or score to match the monitor's refresh rate. (Turn off G-SYNC/VSYNC or similar frame capping features) Excessive background activity can lower GPU performance compared to other programs using the GPU. Software for capturing or monitoring frames can hinder the GPU from operating at its maximum capacity. Disable FRAPS, Afterburner, and other similar settings.
Hello, your response is appreciated! The system is indeed running at 2133Mhz. I’ve previously disabled background apps and been aware of XMP before. However, I completely neglected to enable it until now. I tried restarting with XMP profile 1 at 3000Mhz, and GTA 4 is now running smoothly at over 120fps on the highest settings. Thanks for the reminder! Just cleared a minor issue in my PC.
Haha, nice to hear it’s helped boost performance! Before XMP it was a bit slow, but now you’re seeing noticeable gains. How did it perform before XMP? What were your FPS numbers? I’ve been working with PCs and repairs for over 12 years, and I always notice RAM becomes a major issue in both high-end and budget builds. Even on a Sandy Bridge 2500 MHz, using 2133 DDR3 gives you more frames than 1600 MHz—often a solid 20 to 30 FPS difference. That’s crucial. Really appreciate the update. Stay mindful of system stability, though; Ryzen can be quite picky with XMP settings and might reset back to default speeds, which could push it back to 2133. Keep an eye on that!