F5F Stay Refreshed Software PC Gaming Performance issues and substandard standards

Performance issues and substandard standards

Performance issues and substandard standards

G
234
12-18-2018, 11:43 AM
#1
Hello,

My gaming setup: an MSI GTX 1080 with 8GB of VRAM, an Intel Core i5-6600k processor, 16GB of HyperX Fury 2600 RAM, and an MSI B250M PRO-VD motherboard.

I’m experiencing an issue where, in many games, I achieve a solid frame rate of around 100 fps on various settings. However, when running games at their highest configurations—particularly ultra presets—the visuals appear subpar and don’t match the capabilities of a GTX 1080.

Specifically, in Red Dead Redemption 2, regardless of whether I use ultra, high, or medium settings, my frame rate consistently hovers between 35 and 45 fps. While this isn't terrible, I’m not completely satisfied, and 40 fps feels somewhat underwhelming.

I'm wondering if I’m overlooking something or if this is simply a characteristic of the game due to its recent release. My primary concern is screen stuttering in Red Dead 2. I've been monitoring my hardware using RivaTuner, and my GPU typically operates at 85% usage, while the game seems to be utilizing less than 50% of my VRAM. My CPU usage is around 50%, and memory consumption is approximately 8600MB. My GPU, CPU, and temperatures are all within acceptable ranges, with the GPU occasionally reaching 74°C.

I’ve experimented with NVIDIA settings, switching from “Quality” to “Performance,” which yielded only a 5 fps gain. The game frequently freezes for approximately four seconds, then returns to smooth operation—this tends to happen every three minutes.

This system is relatively new, assembled specifically for gaming purposes. I ensure my operating system is installed and that all drivers are up-to-date, especially the graphics driver. Should I update my BIOS or CPU?

I suspect that my monitor might be a contributing factor to the poor graphics quality. I've also adjusted memory frequency to the optimal setting, which is now set to auto as well.

If you have any advice or potential solutions, please let me know. Thank you.
G
ghostghillie07
12-18-2018, 11:43 AM #1

Hello,

My gaming setup: an MSI GTX 1080 with 8GB of VRAM, an Intel Core i5-6600k processor, 16GB of HyperX Fury 2600 RAM, and an MSI B250M PRO-VD motherboard.

I’m experiencing an issue where, in many games, I achieve a solid frame rate of around 100 fps on various settings. However, when running games at their highest configurations—particularly ultra presets—the visuals appear subpar and don’t match the capabilities of a GTX 1080.

Specifically, in Red Dead Redemption 2, regardless of whether I use ultra, high, or medium settings, my frame rate consistently hovers between 35 and 45 fps. While this isn't terrible, I’m not completely satisfied, and 40 fps feels somewhat underwhelming.

I'm wondering if I’m overlooking something or if this is simply a characteristic of the game due to its recent release. My primary concern is screen stuttering in Red Dead 2. I've been monitoring my hardware using RivaTuner, and my GPU typically operates at 85% usage, while the game seems to be utilizing less than 50% of my VRAM. My CPU usage is around 50%, and memory consumption is approximately 8600MB. My GPU, CPU, and temperatures are all within acceptable ranges, with the GPU occasionally reaching 74°C.

I’ve experimented with NVIDIA settings, switching from “Quality” to “Performance,” which yielded only a 5 fps gain. The game frequently freezes for approximately four seconds, then returns to smooth operation—this tends to happen every three minutes.

This system is relatively new, assembled specifically for gaming purposes. I ensure my operating system is installed and that all drivers are up-to-date, especially the graphics driver. Should I update my BIOS or CPU?

I suspect that my monitor might be a contributing factor to the poor graphics quality. I've also adjusted memory frequency to the optimal setting, which is now set to auto as well.

If you have any advice or potential solutions, please let me know. Thank you.

B
Bloodmate
Member
193
12-18-2018, 03:45 PM
#2
I possess a Zotac GTX 1080, which I acquired as part of a personalized desktop system when the card was initially released three years ago. I consistently achieve optimal visual quality in all games at maximum settings without encountering any difficulties.

If you are utilizing the NVIDIA Experience program, I strongly advise against using it, as it frequently introduces more issues than it resolves. After removing the program, update your drivers manually and select “Custom Install” to deselect the NVIDIA Experience option. Then, within your startup menu, disable any references to it – this will prevent the system from automatically re-launching the program.

I received a Zotac disc containing an overclocking application, which I examined and believed was a game. However, since I do not engage in overclocking, I contacted Zotac seeking guidance.

The representative who responded indicated his bewilderment at the inclusion of an overclocking tool on the disc, stating and quoting, “Occasionally, under intense load, the card may automatically attempt to increase its performance.” Please be aware that I am relaying this information as it was communicated to me; I cannot verify its accuracy.
B
Bloodmate
12-18-2018, 03:45 PM #2

I possess a Zotac GTX 1080, which I acquired as part of a personalized desktop system when the card was initially released three years ago. I consistently achieve optimal visual quality in all games at maximum settings without encountering any difficulties.

If you are utilizing the NVIDIA Experience program, I strongly advise against using it, as it frequently introduces more issues than it resolves. After removing the program, update your drivers manually and select “Custom Install” to deselect the NVIDIA Experience option. Then, within your startup menu, disable any references to it – this will prevent the system from automatically re-launching the program.

I received a Zotac disc containing an overclocking application, which I examined and believed was a game. However, since I do not engage in overclocking, I contacted Zotac seeking guidance.

The representative who responded indicated his bewilderment at the inclusion of an overclocking tool on the disc, stating and quoting, “Occasionally, under intense load, the card may automatically attempt to increase its performance.” Please be aware that I am relaying this information as it was communicated to me; I cannot verify its accuracy.

Z
ZachT0626
Member
50
12-18-2018, 06:12 PM
#3
Hello, my friend, I’ve completed your request. Additionally, I’ve switched to DirectX 12 and now I'm achieving a consistent 60 frames per second. Thanks!
Z
ZachT0626
12-18-2018, 06:12 PM #3

Hello, my friend, I’ve completed your request. Additionally, I’ve switched to DirectX 12 and now I'm achieving a consistent 60 frames per second. Thanks!

A
angrybird38
Member
161
12-19-2018, 12:25 AM
#4
The transition was initially seamless, but subsequently reverted.
A
angrybird38
12-19-2018, 12:25 AM #4

The transition was initially seamless, but subsequently reverted.