Performance is dropping significantly on this Ryzen 7 2700 EDC model.
Performance is dropping significantly on this Ryzen 7 2700 EDC model.
Your Ryzen 7 2700 is experiencing issues and it seems like the EDC is reaching its maximum performance of 99%. The suggested fix was adjusting the power plan, but that didn’t help. I’ve also tried other settings without success. Your PC can handle newer games but isn’t running smoothly. Any suggestions or a straightforward solution would be greatly appreciated. Thanks!
It's merely a reference point. EDC stands for Electrical Design Current. It highlights that you're operating at 99% of the 90-amp rating, though the peak reaches 168 amps. No cause for concern—just what the system might handle under full load.
Let me know what you're referring to, and I'll help assess its effect on your gameplay.
Well, you could run some benchmarks and compare the results to others with similar hardware to see if you're performance is as it should be. I recommend 3DMark Firestrike and Timespy. As for free benchmarking games, Shadow of the tomb raider has a free demo that contains a benchmark. Also, there's a free demo of Doom (2016). For CPU performance, there's Cinebench R20. Are you using the latest Chipset drivers from AMD? The latest motherboard bios?
Ryzen 7 runs at 3.450 GHz with hyperthreading enabled in BIOS (Auto mode, no game boost or major overclock). You have an MSI B450 Tomahawk board, 16GB DDR4 RAM at 3200MHz (two 8GB modules), a Gigabyte Radeon RX 570 graphics card, a 750W PSU from Cooler Master, and a Hyper 212 cooler.