PCIe x16 compatibility issue

E

ethernal
Junior Member

14

08-14-2018, 02:46 PM

#1

Hello, your setup seems to work fine with different graphics cards. The D-Sub connection and PCIe behavior might be the issue. The GeForce 9500 GT doesn’t display anything when connected, but it runs without problems in another system. The 20-pin DIMM could be the cause—check if it matches your motherboard requirements. Make sure the RAM is properly seated and try a different slot or cable if needed.

J

julian_05
Member

185

08-19-2018, 12:56 AM

#2

Hello, your setup seems to work fine with different graphics cards. The D-Sub connection and PCIe behavior might be the issue. The GeForce 9500 GT doesn’t display anything when connected, but it runs without problems in another system. The 20-pin DIMM could be the cause—check if it matches your motherboard requirements. Make sure the RAM is properly seated and try a different slot or cable if needed.

K

kohiplays
Member

155

08-19-2018, 03:24 AM

#3

I understand this might seem a bit confusing, but it's important to confirm the connection type. The card features both PCI and PCIe interfaces, so verify it's a PCI or PCIe slot as requested.