PCIe clip bent occurs due to improper installation or damage.
PCIe clip bent occurs due to improper installation or damage.
I wouldn't suggest using that motherboard, but the contacts remain intact and properly placed. If you manage to secure the bracket again, the slot should still function. One possible solution is to apply heat with a soldering iron and gently reshape the damaged wall, allowing it to reform into a solid surface. Be cautious when adjusting contacts, as shifting them could harm your graphics card.
Consider adding a GPU anti-sag bracket to prevent damage from the drooping PCIe slot
It seems to be an older DELL motherboard from MSI. Likely came with a modest graphics card and a compact GPU bracket. Over time, it won’t support heavy cards well—expect sagging. Connectors usually hold but can occasionally bend. It’s probable the PC was moved or lifted a few times while the GPU was installed. If it still functions, swap in the old GPU and consider upgrading to a new board and CPU. You’d likely have to force the new card in, possibly damaging the board. You probably intended an upgrade. If you just bought it, avoid using it. Pulling a used board from DELL isn’t advised—they often cut corners on parts and durability. Their quality is built to meet the basic warranty, not their own standards.