PC stops working following the BIOS process.
PC stops working following the BIOS process.
Hello,
I own an older PC from around 2008 and recently upgraded its power supply unit (BeQuiet 450 bronze) and GPU (GT 730). It was functioning properly until about a week ago. I recently restarted the CPU, and it would only boot for a few seconds—between 5 to 10 seconds—and then shut down abruptly without any warning or message. Occasionally it powers off quickly, while other times it takes longer after not being used for a few hours.
I bought the PSU expecting it to be faulty, but the issue persists. I’ve checked the CPU cooler, removed the GPU, disconnected the SATA cables one by one, and even tried swapping in two RAM sticks at a time, yet nothing has changed.
It seems the problem might be related to the motherboard, as I’ve tried almost everything. With limited funds, replacing parts will be difficult. Do you have any suggestions?
Checking the specifications of all installed parts reveals the details of this system (make and model). Considering its age, it's likely the motherboard has problems such as faulty capacitors, which would require a new motherboard.
Mobo: Asus P5kpl-am is equipped with an Intel Quad Core Q8400 processor.
CPU: Intel Quad Core Q8400
Memory: 2+2gb Patriot DDR2 RAM (bought two years ago)
Power Supply: CV550 Corsair (acquired yesterday)
Capture some images of the motherboard and share them on a platform such as imgur.com, then share the link here.
I overlooked mentioning that detail. A few pins are damaged. It still works somewhat, but it's been this way for about a year without any problems. Wouldn't it require more time for the PC to shut down unexpectedly due to temperature changes?
If the CPU isn't cooling well, it will shut down rapidly. You can easily buy a new cooler at a low cost. Otherwise, spending more on repairs makes sense since the system is outdated. It's smarter to replace the whole setup instead.
Sure, I'll look for a suitable alternative and check if any adjustments are needed. Thanks for letting me know!
I don't like the Intel push-pin heatsinks. They work fine at first, but often cause problems when you try to remove them later. I usually replaced them with a more secure option.
An example is this link: https://www.newegg.com/enermax-ets-n31-0...6835214074