F5F Stay Refreshed Hardware Desktop PC remains inactive even after shutdown or sleep unless I reset the power supply switch again.

PC remains inactive even after shutdown or sleep unless I reset the power supply switch again.

PC remains inactive even after shutdown or sleep unless I reset the power supply switch again.

Pages (3): 1 2 3 Next
W
wpbvjccc
Member
126
10-27-2016, 06:39 AM
#1
Experiencing a strange problem where the PC fails to power on after shutdowns or sleeps, only reactivating when the PSU is turned off. I suspect power remains from the motherboard but it doesn’t wake up until the PSU switch is reset. The issue seems isolated to this power cycle behavior. Any suggestions would be appreciated. I’ve included my details below if helpful.
W
wpbvjccc
10-27-2016, 06:39 AM #1

Experiencing a strange problem where the PC fails to power on after shutdowns or sleeps, only reactivating when the PSU is turned off. I suspect power remains from the motherboard but it doesn’t wake up until the PSU switch is reset. The issue seems isolated to this power cycle behavior. Any suggestions would be appreciated. I’ve included my details below if helpful.

4
476ms
Member
203
11-02-2016, 09:36 PM
#2
I've finally fixed the issue after enabling ErP in the BIOS settings. It's been a week without any problems before, which is a big improvement. I'm facing the same problem now with almost identical hardware—5900X instead of 5800X and an EVGA FTW3 Ultra 3080 rather than Founders. Full specs are available here: https://pcpartpicker.com/list/jpnwnL. I've been trying various troubleshooting steps: updating the BIOS, clearing CMOS, disabling all BIOS settings including XMP/DOCP, turning off Fast Boot and Quick Boot, checking wiring especially in the front panel, reseating RAM and GPU, moving the PSU cable to a different outlet, using the built-in Start button on the motherboard, and even trying the screwdriver-2-pin method. None of these worked. The problem keeps happening every day. Let me know if you think you can help!
4
476ms
11-02-2016, 09:36 PM #2

I've finally fixed the issue after enabling ErP in the BIOS settings. It's been a week without any problems before, which is a big improvement. I'm facing the same problem now with almost identical hardware—5900X instead of 5800X and an EVGA FTW3 Ultra 3080 rather than Founders. Full specs are available here: https://pcpartpicker.com/list/jpnwnL. I've been trying various troubleshooting steps: updating the BIOS, clearing CMOS, disabling all BIOS settings including XMP/DOCP, turning off Fast Boot and Quick Boot, checking wiring especially in the front panel, reseating RAM and GPU, moving the PSU cable to a different outlet, using the built-in Start button on the motherboard, and even trying the screwdriver-2-pin method. None of these worked. The problem keeps happening every day. Let me know if you think you can help!

J
JAWS0116
Junior Member
43
11-03-2016, 12:51 AM
#3
J
JAWS0116
11-03-2016, 12:51 AM #3

O
Olliesimpo
Member
65
11-03-2016, 12:59 AM
#4
I experienced the same odd problem with an ASUS Crosshair VIII Dark Hero equipped with a 5950X and a 3090 RTX, running the latest BIOS. I noticed something interesting in the BIOS: there’s a setting to switch the motherboard into “Stealth mode” when it’s powered off, hibernated, or sleeping. When you turn it on after shutting it down, all mainboard lights should turn off. If they remain lit, the power button functions. But if the “Start” button stays on after shutdown, the power button fails and you must repeatedly switch the PSU on and off. Eventually, the “Start” light comes back on and the power button works again. This seems to be connected to how the system powers down rather than a sudden failure during shutdown. I attempted to shut it down using both Windows 10 and Linux, but both operating systems had issues with the problem.
O
Olliesimpo
11-03-2016, 12:59 AM #4

I experienced the same odd problem with an ASUS Crosshair VIII Dark Hero equipped with a 5950X and a 3090 RTX, running the latest BIOS. I noticed something interesting in the BIOS: there’s a setting to switch the motherboard into “Stealth mode” when it’s powered off, hibernated, or sleeping. When you turn it on after shutting it down, all mainboard lights should turn off. If they remain lit, the power button functions. But if the “Start” button stays on after shutdown, the power button fails and you must repeatedly switch the PSU on and off. Eventually, the “Start” light comes back on and the power button works again. This seems to be connected to how the system powers down rather than a sudden failure during shutdown. I attempted to shut it down using both Windows 10 and Linux, but both operating systems had issues with the problem.

T
TommyTheLommy
Posting Freak
846
11-03-2016, 07:30 AM
#5
You're experiencing the same problem with 5950X, Dark Hero VIII motherboard, and a 1080Ti graphics card. Someone has suggestions or solutions you might find helpful.
T
TommyTheLommy
11-03-2016, 07:30 AM #5

You're experiencing the same problem with 5950X, Dark Hero VIII motherboard, and a 1080Ti graphics card. Someone has suggestions or solutions you might find helpful.

M
maximumpats
Junior Member
46
11-03-2016, 07:40 AM
#6
The update from Version 3601 to Version 3801 appears to have resolved the problem. I might stop returning my PSU: https://rog.asus.com/motherboards/rog-cr...pdesk_bios
M
maximumpats
11-03-2016, 07:40 AM #6

The update from Version 3601 to Version 3801 appears to have resolved the problem. I might stop returning my PSU: https://rog.asus.com/motherboards/rog-cr...pdesk_bios

S
Skybertronic
Member
62
11-13-2016, 02:38 PM
#7
It seems to be recurring now. Maybe I didn’t let the machine rest enough. Looks like it only occurs when the computer has been off for some time.
S
Skybertronic
11-13-2016, 02:38 PM #7

It seems to be recurring now. Maybe I didn’t let the machine rest enough. Looks like it only occurs when the computer has been off for some time.

B
Bulldog1245
Junior Member
15
11-14-2016, 02:49 PM
#8
I suspect an issue with your 5950X and the X570 Dark Hero. After turning it off, it frequently fails to start, even though the lights stay on. I've attempted repairs without success, which is really frustrating.
B
Bulldog1245
11-14-2016, 02:49 PM #8

I suspect an issue with your 5950X and the X570 Dark Hero. After turning it off, it frequently fails to start, even though the lights stay on. I've attempted repairs without success, which is really frustrating.

L
Lorddoom139
Posting Freak
956
11-20-2016, 04:51 PM
#9
I just swapped out my motherboard for a darker hero model because the previous one wasn’t working well, and I’m following the same path now.
L
Lorddoom139
11-20-2016, 04:51 PM #9

I just swapped out my motherboard for a darker hero model because the previous one wasn’t working well, and I’m following the same path now.

F
FaZeLewis21
Junior Member
8
11-20-2016, 08:50 PM
#10
I'm still dealing with this setup issue, okay? =( Thanks for checking in, everyone. Sorry you're having the same trouble, but it's good to know it's not just me or you... LOL... I had a *really odd* experience this morning that made me rethink this problem. Usually I don't use Sleep, I always shut down completely. But last night I tried Sleep because I was only going to be away for a few hours. This morning when I tried to turn it on... the same thing happened. -_- I flipped the PSU power switch, waited 5 seconds, then turned it back on and pressed the case power button. It worked just like every other day over the past nine months, except this time... my PC came back on, everything was fine... but wow, the monitors were black. ...Do they sleep? Hmmm... I press a single key on my keyboard, and suddenly the screens turned on again, and all my programs were still running from when I put it to sleep! How is this possible after completely cutting power to the machine??? O_O
F
FaZeLewis21
11-20-2016, 08:50 PM #10

I'm still dealing with this setup issue, okay? =( Thanks for checking in, everyone. Sorry you're having the same trouble, but it's good to know it's not just me or you... LOL... I had a *really odd* experience this morning that made me rethink this problem. Usually I don't use Sleep, I always shut down completely. But last night I tried Sleep because I was only going to be away for a few hours. This morning when I tried to turn it on... the same thing happened. -_- I flipped the PSU power switch, waited 5 seconds, then turned it back on and pressed the case power button. It worked just like every other day over the past nine months, except this time... my PC came back on, everything was fine... but wow, the monitors were black. ...Do they sleep? Hmmm... I press a single key on my keyboard, and suddenly the screens turned on again, and all my programs were still running from when I put it to sleep! How is this possible after completely cutting power to the machine??? O_O

Pages (3): 1 2 3 Next