PC Overheating

Pages (2): 1 2 Next

pedro_tkf
Senior Member

643

01-11-2021, 04:07 PM

I've noticed my PC is getting too hot. When I start it up, the CPU hits 90°C or higher and gradually drops but stays above 70°C while idle. Running any game triggers overheating, pushing temps to 100°C. This leads to lower frame rates and even shutdowns. I changed the thermal paste, cleaned the fans, but I'm unsure what else works. System details: CPU i7-12700K, cooler Lian Li Galahad 240 AIO, motherboard MSI PRO Z690-A, RAM Corsair VENGEANCE RGB 32GB DDR4-3600, storage Seagate Barracuda 2TB 3.5", video MSI RTX 3080 Ti, case LIAN LI LANCOOL II MESH with fans, power supply Corsair RM850 W, and I'm using Windows 11.

pedro_tkf

01-11-2021, 04:07 PM #1

monkeykatje
Junior Member

01-11-2021, 05:01 PM

Cooler seems improperly secured or likely malfunctioning (failed pump, blocked passage...)

monkeykatje

01-11-2021, 05:01 PM #2

Cooler seems improperly secured or likely malfunctioning (failed pump, blocked passage...)

ElFrank365
Member

01-11-2021, 05:16 PM

Another approach involves the contact frame model that tackles a vulnerability in the 1700 socket (alternative options exist as well).

ElFrank365

01-11-2021, 05:16 PM #3

Another approach involves the contact frame model that tackles a vulnerability in the 1700 socket (alternative options exist as well).

jbrowar
Junior Member

01-11-2021, 10:15 PM

Verify the pump operation by observing RPM readings via software such as HWinfo and checking for fluid flow through the pipes.

jbrowar

01-11-2021, 10:15 PM #4

Verify the pump operation by observing RPM readings via software such as HWinfo and checking for fluid flow through the pipes.

Aragon532
Member

100

01-12-2021, 06:30 AM

The serial number for the AIO is listed in the defective recall range.

Aragon532

01-12-2021, 06:30 AM #5

The serial number for the AIO is listed in the defective recall range.

thetalkkari
Member

152

01-12-2021, 07:15 AM

You check your records to confirm the change. If you re-mounted it, note the details and compare them to see if everything matches.

thetalkkari

01-12-2021, 07:15 AM #6

You check your records to confirm the change. If you re-mounted it, note the details and compare them to see if everything matches.

WaterLily2003
Senior Member

648

01-12-2021, 07:22 AM

I'm not sure which value to look at in HWiNFO. There's a CPU one and a pump one. Both are running.

WaterLily2003

01-12-2021, 07:22 AM #7

I'm not sure which value to look at in HWiNFO. There's a CPU one and a pump one. Both are running.

_ZeVuN_
Member

234

01-14-2021, 03:24 AM

Inspect the port where the pump cable connects. Notice if the fluid flows in one tube more than the other. Does the warmer tube show any signs of movement?

_ZeVuN_

01-14-2021, 03:24 AM #8

Inspect the port where the pump cable connects. Notice if the fluid flows in one tube more than the other. Does the warmer tube show any signs of movement?

Slimeboss2003
Junior Member

01-15-2021, 08:39 PM

I don't feel liquid moving through the tubes but one is definitely hotter than the other.

Slimeboss2003

01-15-2021, 08:39 PM #9

I don't feel liquid moving through the tubes but one is definitely hotter than the other.

Logarion
Member

202

01-16-2021, 01:23 AM

#10

It's clear this item is outside the acceptable timeframe.

Logarion

01-16-2021, 01:23 AM #10

It's clear this item is outside the acceptable timeframe.

Pages (2): 1 2 Next