F5F Stay Refreshed Hardware Desktop PC not responding, monitor shows nothing, need assistance

PC not responding, monitor shows nothing, need assistance

PC not responding, monitor shows nothing, need assistance

Y
yoman225
Member
71
04-17-2021, 11:28 PM
#1
I’m very concerned about a possible major error. After turning on my new PC, it started up fine. I restarted and attempted to enable the CPU boost and XMP settings in the BIOS. I saved the changes and left. Now the system powers on but the display remains inactive. I tested two monitors—HDMI and DP worked. The processor is a 11900K, and I’m planning to use an integrated graphics card since I haven’t installed a dedicated GPU yet.
Y
yoman225
04-17-2021, 11:28 PM #1

I’m very concerned about a possible major error. After turning on my new PC, it started up fine. I restarted and attempted to enable the CPU boost and XMP settings in the BIOS. I saved the changes and left. Now the system powers on but the display remains inactive. I tested two monitors—HDMI and DP worked. The processor is a 11900K, and I’m planning to use an integrated graphics card since I haven’t installed a dedicated GPU yet.

S
Stefandefijter
Junior Member
41
04-24-2021, 11:53 PM
#2
Reset the system by clearing the CMOS. This will restore the BIOS to its original configuration, ensuring normal operation.
S
Stefandefijter
04-24-2021, 11:53 PM #2

Reset the system by clearing the CMOS. This will restore the BIOS to its original configuration, ensuring normal operation.

C
Commando__
Senior Member
744
05-05-2021, 01:13 PM
#3
Yes, you can proceed without any display on the monitor.
C
Commando__
05-05-2021, 01:13 PM #3

Yes, you can proceed without any display on the monitor.

W
Winded_
Member
66
05-08-2021, 03:15 PM
#4
Performing a CMOS reset involves turning off the PC, removing the small battery from the motherboard, pressing the power button while it's disconnected, and then reinserting it. It’s recommended to watch a tutorial if you're unsure. Working with hardware can be intimidating for beginners.
W
Winded_
05-08-2021, 03:15 PM #4

Performing a CMOS reset involves turning off the PC, removing the small battery from the motherboard, pressing the power button while it's disconnected, and then reinserting it. It’s recommended to watch a tutorial if you're unsure. Working with hardware can be intimidating for beginners.

S
sagab123
Junior Member
49
05-08-2021, 04:03 PM
#5
Thanks
S
sagab123
05-08-2021, 04:03 PM #5

Thanks