F5F Stay Refreshed Hardware Desktop PC front light, CPU fan, and case fan are active yet not responding or powering up.

PC front light, CPU fan, and case fan are active yet not responding or powering up.

PC front light, CPU fan, and case fan are active yet not responding or powering up.

T
TorJules
Member
184
12-08-2016, 07:25 PM
#1
I was working with an older machine I received and installed Windows yesterday. After setting up some apps and games, I powered it down. Now, when I press the back switch on the CPU, it rapidly spins the CPU, case fan, and front light all at once. It doesn’t seem to boot properly from here. I changed the power outlet, confirmed the 120V supply wasn’t 240V, and pressed the button for more than a minute without any results. The blinking didn’t follow any recognizable pattern, and there were no sounds other than the fan pulsing. The only solution was turning off the PSU switch. IMG_1891.MOV
T
TorJules
12-08-2016, 07:25 PM #1

I was working with an older machine I received and installed Windows yesterday. After setting up some apps and games, I powered it down. Now, when I press the back switch on the CPU, it rapidly spins the CPU, case fan, and front light all at once. It doesn’t seem to boot properly from here. I changed the power outlet, confirmed the 120V supply wasn’t 240V, and pressed the button for more than a minute without any results. The blinking didn’t follow any recognizable pattern, and there were no sounds other than the fan pulsing. The only solution was turning off the PSU switch. IMG_1891.MOV

T
TJAWS
Member
64
12-10-2016, 05:49 PM
#2
Possible issue: depleted CMOS power source.
T
TJAWS
12-10-2016, 05:49 PM #2

Possible issue: depleted CMOS power source.

V
Viitin7
Member
214
12-11-2016, 12:26 PM
#3
I attempted to change it, but the issue persisted.
V
Viitin7
12-11-2016, 12:26 PM #3

I attempted to change it, but the issue persisted.

D
DeadpoOol
Member
175
12-15-2016, 03:53 PM
#4
Follow the steps to remove the old battery, as it might have changed the configuration. Once done, consider disassembling the device, cleaning all parts, and reassembling it carefully.
D
DeadpoOol
12-15-2016, 03:53 PM #4

Follow the steps to remove the old battery, as it might have changed the configuration. Once done, consider disassembling the device, cleaning all parts, and reassembling it carefully.

M
MrApple2004
Junior Member
3
12-16-2016, 03:19 PM
#5
Thanks! I also checked the CMOS battery again, and during the process I realized the 24-pin wasn’t fully seated.
M
MrApple2004
12-16-2016, 03:19 PM #5

Thanks! I also checked the CMOS battery again, and during the process I realized the 24-pin wasn’t fully seated.

I
idog6295
Junior Member
43
12-17-2016, 08:08 AM
#6
Yeah, it could be similar to that.
I
idog6295
12-17-2016, 08:08 AM #6

Yeah, it could be similar to that.