F5F Stay Refreshed Hardware Desktop pc fails to start with NVIDIA GTX970, functions properly with older graphics cards

pc fails to start with NVIDIA GTX970, functions properly with older graphics cards

pc fails to start with NVIDIA GTX970, functions properly with older graphics cards

K
KuroSen_
Junior Member
33
02-28-2016, 12:52 PM
#1
I'm a total noob at this , so please be easy on me. So I wanted to upgrade my old pc from nvidia gefore 610 gt to the nvidia gtx 970. Once I removed the old card and installed the new card, plug both 6 pin cables into it, when I hit the on button, the light inside of it momentarily turns on for about half a second and then disappears and the pc doesn't even attempt to boot, there's no harddrive making a sound, nothing. If I try to turn it on again, the light won't go on and nothing happens. If I flip the power button (to the power supply) off and on then i can get the pc on button to do the same thing, but again, only once. No boot sequence, nothing. I removed the 970 and put the 610 back in and it works fine. I tried just having the 970 in the pcie slot with no power cables plugged into it, and the boot sequence recognizes new hardware (and I get to an american megatrends red screen that instructs me to hit f1. I usually have an asus screen since I have a asustek p8z77-v lx mother board.) My power supply is a corsair cx500 but the computer is from 2012. I'm running linux mint. What could be the issue? The 970 card, is a used card off ebay. Is the card bad? Thanks y'all.
K
KuroSen_
02-28-2016, 12:52 PM #1

I'm a total noob at this , so please be easy on me. So I wanted to upgrade my old pc from nvidia gefore 610 gt to the nvidia gtx 970. Once I removed the old card and installed the new card, plug both 6 pin cables into it, when I hit the on button, the light inside of it momentarily turns on for about half a second and then disappears and the pc doesn't even attempt to boot, there's no harddrive making a sound, nothing. If I try to turn it on again, the light won't go on and nothing happens. If I flip the power button (to the power supply) off and on then i can get the pc on button to do the same thing, but again, only once. No boot sequence, nothing. I removed the 970 and put the 610 back in and it works fine. I tried just having the 970 in the pcie slot with no power cables plugged into it, and the boot sequence recognizes new hardware (and I get to an american megatrends red screen that instructs me to hit f1. I usually have an asus screen since I have a asustek p8z77-v lx mother board.) My power supply is a corsair cx500 but the computer is from 2012. I'm running linux mint. What could be the issue? The 970 card, is a used card off ebay. Is the card bad? Thanks y'all.

C
CommanderWoof
Member
52
03-02-2016, 05:38 PM
#2
It seems you're drawing excessive current from a single rail in the power supply, triggering its protection and causing shutdown. Most PSUs feature several 12V output paths; overloading any one will lead to failure. Consider using a different 6-pin PCIe connector from the PSU and another from a separate "Molex" circuit (see Adapter link). This should resolve the issue. Option 2 is to replace the PSU entirely.
C
CommanderWoof
03-02-2016, 05:38 PM #2

It seems you're drawing excessive current from a single rail in the power supply, triggering its protection and causing shutdown. Most PSUs feature several 12V output paths; overloading any one will lead to failure. Consider using a different 6-pin PCIe connector from the PSU and another from a separate "Molex" circuit (see Adapter link). This should resolve the issue. Option 2 is to replace the PSU entirely.

2
20pega
Member
218
03-05-2016, 11:54 PM
#3
The details confirm a single rail design, which supports compatibility with the latest components. That makes the molex concept less likely to fit.
2
20pega
03-05-2016, 11:54 PM #3

The details confirm a single rail design, which supports compatibility with the latest components. That makes the molex concept less likely to fit.

I
iTzOSAMH
Member
62
03-06-2016, 05:11 AM
#4
The calculations don’t match up. A GPU doesn’t consume much power during the posting sequence, which shouldn’t cause such issues. Also, most PSUs feature a single 12V rail, particularly at lower wattage levels. It seems your card probably has a shorted power rail. That’s likely the problem.
I
iTzOSAMH
03-06-2016, 05:11 AM #4

The calculations don’t match up. A GPU doesn’t consume much power during the posting sequence, which shouldn’t cause such issues. Also, most PSUs feature a single 12V rail, particularly at lower wattage levels. It seems your card probably has a shorted power rail. That’s likely the problem.

S
Serpenh33
Member
208
03-07-2016, 06:29 PM
#5
I update my earlier remote diagnosis and align with Levent’s view. It seems your GTX970 likely has an open short and is malfunctioning. The PSU is noticing this and taking protective measures instead of failing catastrophically. If you had a spare, replacing it could confirm whether the issue lies with the card or the PSU connections.
S
Serpenh33
03-07-2016, 06:29 PM #5

I update my earlier remote diagnosis and align with Levent’s view. It seems your GTX970 likely has an open short and is malfunctioning. The PSU is noticing this and taking protective measures instead of failing catastrophically. If you had a spare, replacing it could confirm whether the issue lies with the card or the PSU connections.

M
Matke04
Posting Freak
825
03-08-2016, 07:28 AM
#6
Hey team, I received a refund from eBay today.
M
Matke04
03-08-2016, 07:28 AM #6

Hey team, I received a refund from eBay today.